2902995 Phoenix Contact AC/DC Power Supplies

2902995 Product Details

• Depth
  84 mm
• Nominal power consumption
  134.7 VA
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Installation distance right/left
  0 mm / 0 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  100 V AC ... 240 V AC
• Current consumption
  1.3 A (100 V AC)
• Power factor (cos phi)
  0.5
• Connection in parallel
  Yes, for redundancy and increased capacity
• Typical response time
  < 1 s
• Insulation voltage input/output
  4 kV AC (type test)
• Conductor cross section solid max.
  2.5 mm²
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• CSA
  CAN/CSA-C22.2 No. 60950-1-07
• Frequency range
  10 kHz ... 80 MHz
• Conducted interference
  EN 61000-4-6
• China RoHS
  Environmentally Friendly Use Period = 25;
• ECLASS 4.0
  27040700
ETIM 6.0
EC002540
ETIM 7.0
EC002540
Width
35 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
85 V AC ... 264 V AC
Input fuse
2 A (slow-blow, internal)
Nominal output current (IN)
1.25 A (-25 °C ... 55 °C)
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Output power
60 W
Net weight
0.21 kg
Foot latch material
POM (Polyoxymethylen)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Stripping length
8 mm
Standard - Safety of transformers
EN 61558-2-16
Standard - Safe isolation
DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27040701
ECLASS 5.0
27049000
ECLASS 7.0
27049002
UNSPSC 7.0901
39121004
UNSPSC 21.0
39121004
Height
90 mm
Installation distance top/bottom
30 mm / 30 mm
Climatic class
3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Mains buffering time
> 20 ms (120 V AC)
Type of protection
Transient surge protection
Derating
55 °C ... 70 °C (2.5%/K)
Connection in series
yes
Power loss nominal load max.
< 7 W
Protection class
II (in closed control cabinet)
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Mains variation/undervoltage
EN 61000-4-11
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Test field strength
10 V/m
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
Voltage dips
EN 61000-4-11
ECLASS 4.1
27040700
ETIM 3.0
EC001039
UNSPSC 13.2
39121004
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Degree of pollution
2
Inrush current
< 30 A (typical)
Protective circuit/component
Varistor
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Efficiency
typ. 89 % (120 V AC)
Housing material
Polycarbonate
Conductor cross section solid min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 2 - symmetrical)
ECLASS 11.0
27040701
ECLASS 5.1
27049000
ETIM 4.0
EC000599
UNSPSC 11
39121004
UNSPSC 18.0
39121004
Nominal output voltage
48 V DC ±1 %
Feedback voltage resistance
< 60 V DC
Residual ripple
< 35 mVPP (with nominal values)
Maximum power dissipation in no-load condition
< 0.4 W
MTBF (IEC 61709, SN 29500)
> 1138000 h (40 °C)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section AWG max.
14
Screw thread
M3
UL approvals
UL/C-UL listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (Test Level 3 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 6.0
27049000
ECLASS 9.0
27040701
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
UNSPSC 19.0
39121004
UNSPSC 20.0
39121004

Product condition