2902049 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902049 Product Details

• Width
  6.2 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Configurable/programmable
  Yes
• Voltage output signal
  0 V ... 5 V (via DIP switch)
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Torque
  0.5 Nm ... 0.6 Nm
• Conductor cross section AWG
  24 ... 12 (flexible)
• Degree of pollution
  2
• Protective circuit
  Transient protection
• Mounting position
  any
• Noise emission
  EN 61000-6-4
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.0
  27200200
• ECLASS 9.0
  27210129
• ECLASS 7.0
  27200206
• UNSPSC 7.0901
  39121008
• Height
  109.81 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Linear resistance measuring range
0 Ω ... 4000 Ω (Minimum measuring span: 10% of the selected measuring range)
Connection technology
2-, 3-, 4-conductor
Current output signal
0 mA ... 20 mA (via DIP switch)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Overvoltage category
II
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Standards/regulations
EN 61000-4-6
Certificate
DNV GL 14445-15HH
ECLASS 11.0
27210129
ECLASS 6.0
27200200
Temperature measuring range
-200 °C ... 850 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 850°C via DIP switches)
Load/output load voltage output
≥ 10 kΩ
Transmission error resistance thermometer
0.1 % * 350 K / set measuring range; 0.1 % > 350 K (Pt/Ni)
Short-circuit current
< 31.5 mA
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Screw thread
M3
Identification
C, EMC2
Max. output current
24.6 mA
Max. output voltage
approx. 12.3 V
Connection method
Screw connection
UL, USA/Canada
UL 508 Listed
ECLASS 5.0
27200200
ETIM 2.0
EC001446
ETIM 7.0
EC002919
UNSPSC 6.01
30211506
UNSPSC 21.0
41112105
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors
Ripple
< 10 mVrms
Power consumption
≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Maximum temperature coefficient
0.01 %/K
Rated insulation voltage
300 V (effective)
Designation
Shipbuilding approval
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27200200
ETIM 6.0
EC002919
UNSPSC 11
39121008
UNSPSC 19.0
41112105
Typical current consumption
32 mA (24 V DC)
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Typical deviation from the measuring range final value
0.07 %
UNSPSC 12.01
39121008
UNSPSC 20.0
41112105
Depth
119.2 mm
Degree of protection
IP20 (not assessed by UL)
Number of outputs
1
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
ATEX
 II 3 G Ex nA IIC T4 Gc X
ECLASS 10.0.1
27210129
ECLASS 5.1
27200200
ETIM 3.0
EC001446
UNSPSC 13.2
41112105
Sensor input current
approx. 200 µA
Stripping length
10 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Transmission error resistance-type sensor
2 Ω
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Conformance
CE-compliant
ETIM 4.0
EC001446
UNSPSC 18.0
41112105

Product condition