2902055 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902055 Product Details

• Height
  109.81 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• ECLASS 5.0
  27200200
• ECLASS 5.1
  27200200
• UNSPSC 12.01
  39121008
• UNSPSC 20.0
  41112105
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Number of outputs
  1
• Max. output voltage
  approx. 12.3 V
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Power consumption
  ≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• Screw thread
  M3
• Overvoltage category
  II
• Electromagnetic compatibility
  Conformance with EMC directive
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• ATEX
   II 3 G Ex nA IIC T4 Gc X
• Conformance
  CE-compliant
• Certificate
  DNV GL 14445-15HH
• ECLASS 7.0
  27200206
ECLASS 6.0
27200200
UNSPSC 7.0901
39121008
UNSPSC 6.01
30211506
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Configurable/programmable
Yes
Degree of protection
IP20 (not assessed by UL)
Voltage output signal
0 V ... 5 V (via DIP switch)
Ripple
< 10 mVrms
Stripping length
10 mm
Torque
0.5 Nm ... 0.6 Nm
Protective circuit
Transient protection
Rated insulation voltage
300 V (effective)
Housing material
PBT
Mounting position
any
UL, USA/Canada
UL 508 Listed
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 2.0
EC001446
ETIM 6.0
EC002919
UNSPSC 13.2
41112105
Depth
119.2 mm
Sensor types that can be used (TC)
B, C, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
Current output signal
0 mA ... 20 mA (via DIP switch)
Short-circuit current
< 31.5 mA
Degree of pollution
2
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27200200
ECLASS 9.0
27210129
ETIM 4.0
EC001446
UNSPSC 11
39121008
UNSPSC 18.0
41112105
Temperature measuring range
-250 °C ... 2500 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches)
Load/output load voltage output
≥ 10 kΩ
Load/output load current output
≤ 600 Ω (at 20 mA)
Typical current consumption
32.7 mA (24 V DC)
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Typical deviation from the measuring range final value
0.05 %
Conductor cross section AWG
24 ... 12 (flexible)
Connection method
Screw connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Max. output current
24.6 mA
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ECLASS 11.0
27210129
UNSPSC 21.0
41112105
Width
6.2 mm
Typical cold point errors
2 K (2 K + (0,2 K * ΔT))
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
ETIM 7.0
EC002919
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Maximum temperature coefficient
≤ 0.01 %/K
Designation
Shipbuilding approval
Identification
C, EMC2
ECLASS 4.1
27200200
ETIM 3.0
EC001446
UNSPSC 19.0
41112105
Transmission error thermocouples
0.1% * 600 K / set measuring range; 0.1% > 600 K (C, E, J, K, N, T, L, U, M Gost, L Gost)
ECLASS 10.0.1
27210129

Product condition