2864273 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864273 Product Details

• Height
  93.1 mm
• Ambient temperature (operation)
  -20 °C ... 65 °C
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of outputs
  1
• Ripple
  < 20 mVPP (at 10 kΩ)
• Short-circuit current
  approx. 10 mA
• Stripping length
  12 mm
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Maximum temperature coefficient
  < 0.02 %/K
• Color
  green
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Configurable/programmable
  Yes, unconfigured
• Load/output load voltage output
  ≥ 10 kΩ
• Supply voltage range
  19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Power consumption
  < 500 mW
• Protective circuit
  Transient protection
• Overvoltage category
  II
• ECLASS 9.0
  27210129
• Depth
  101.2 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage output signal
0 V ... 10 V
Max. current consumption
< 21 mA (at 24 V DC)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
No. of channels
1
Maximum altitude
≤ 2000 m
Sensor input current
1 mA (constant)
Connection technology
2-, 3-, 4-conductor
Load/output load current output
< 500 Ω (at 20 mA)
Connection method
Screw connection
Screw thread
M3
Transmission error in the set measuring range
((100 K / set measurement range [K]) + 0.1)%
Rated insulation voltage
50 V AC/DC
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Identification
UL 508 Recognized
Connection in acc. with standard
CUL
Vibration
B
ECLASS 5.1
27200200
ECLASS 7.0
27200206
ETIM 4.0
EC001446
UNSPSC 13.2
41112105
UNSPSC 20.0
41112105
Electrical isolation
Basic insulation according to EN 61010
Noise emission
EN 61000-6-4
Humidity
B
ETIM 2.0
EC001446
UNSPSC 7.0901
39121008
UNSPSC 12.01
39121008
Width
6.2 mm
Degree of protection
IP20
Sensor types (RTD) that can be used
Pt 100 (IEC 60751/EN 60751)
Current output signal
0 mA ... 20 mA
Max. output current
23 mA
Max. output voltage
approx. 12.5 V
Degree of pollution
2
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Housing material
PBT
Designation
Shipbuilding approval
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Standards/regulations
EN 61000-4-6
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Typical deviation from the measuring range final value
10 %
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210129
ECLASS 6.0
27200200
ETIM 6.0
EC002919
UNSPSC 11
39121008
UNSPSC 21.0
41112105
Conductor cross section AWG
26 ... 12
Mounting position
any
Certificate
DNV GL TAA00002R0
EMC
A
ECLASS 11.0
27210129
ECLASS 4.0
27200200
ETIM 7.0
EC002919
UNSPSC 6.01
30211506
Transmission error in the full measuring range
≤ 0,2 %
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
UNSPSC 18.0
41112105
Nominal supply voltage
24 V DC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27200200
ECLASS 5.0
27200200
ETIM 3.0
EC001446
UNSPSC 19.0
41112105

Product condition