Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2902035 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2902035 Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
Phoenix Contact

Part#:2902035

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Push-in connection technology, standard configuration.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2902035 Phoenix Contact price in the box on the right side or send a quick quote.

2902035 Product Details

  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • Noise immunity
    EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
  • Output name
    Relay output
  • Input resistance current input
    approx. 50 Ω (+0.7 V for test diode)
  • Mechanical service life
    2x 107 cycles
  • Setting range of the response delay
    0 s ... 10 s (can be set freely via software)
  • Power consumption
    ≤ 0.5 W
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm² (with ferrule)
  • Width
    6.2 mm
  • Permissible humidity (operation)
    5 % ... 95 % (non-condensing)
  • Max. input current
    24 mA
  • Contact type
    1 changeover contact
  • Internal hysteresis
    can be set freely via software
  • Stripping length
    10 mm
  • Maximum temperature coefficient
    0.01 %/K
  • Maximum transmission error
    0.1 % (of final value)
  • Test voltage, input/output/supply
    3 kV (50 Hz, 1 min.)
  • Color
    gray
  • Designation
    Shipbuilding approval
  • Humidity
    B
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.0
    27210100
  • ECLASS 4.1
    27210100
  • Depth
    119.2 mm
  • Degree of protection
    IP20 (not assessed by UL)
  • max. input voltage
    12 V
  • Input resistance of voltage input
    > 120 kΩ
  • Limiting continuous current
    6 A AC
  • Supply voltage range
    9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
  • Connection method
    Push-in connection
  • No. of channels
    1
  • Electrical isolation
    Reinforced insulation in accordance with IEC 61010-1
  • Rated insulation voltage
    300 V (effective)
  • Housing material
    PBT
  • Assembly instructions
    The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
  • EMC
    A
  • ECLASS 10.0.1
    27210122
  • ECLASS 9.0
    27210122
  • UNSPSC 6.01
    30211506
  • UNSPSC 11
    39121008
  • UNSPSC 19.0
    39121008
  • Height
    109.81 mm
  • Voltage input signal
    0 V ... 10 V (via DIP switch)
  • Configurable/programmable
    Yes
  • Maximum switching voltage
    250 V AC
  • Nominal supply voltage
    24 V DC
  • Typical current consumption
    40 mA (12 V DC)
  • Conductor cross section AWG
    24 ... 12 (flexible)
  • Overvoltage category
    II
  • Mounting position
    any
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 2
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.0
    27210100
  • ECLASS 7.0
    27210122
  • ETIM 7.0
    EC002654
  • ETIM 6.0
    EC002654
  • UNSPSC 18.0
    39121008
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Current input signal
    0 mA ... 20 mA (via DIP switch)
  • Contact material
    AgSnO2, hard gold-plated
  • Min. switching current
    100 mA (12 V DC)
  • Max. switching current
    6 A AC (250 V AC)
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Status display
    Yellow LED (switching output)
  • Degree of pollution
    2
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 2
  • Certificate
    DNV GL TAA000021E
  • Vibration
    A
  • ECLASS 11.0
    27210122
  • UNSPSC 7.0901
    39121008
  • UNSPSC 13.2
    39121008
  • Switching point accuracy
    < 0.1 %
  • Noise emission
    EN 61000-6-4
  • Electromagnetic compatibility
    Conformance with EMC directive
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 2
  • Identification
    UL 508 Listed
  • Temperature
    B
  • ECLASS 5.1
    27210100
  • ECLASS 6.0
    27210100
  • UNSPSC 12.01
    39121008
  • UNSPSC 21.0
    39121008
  • ETIM 4.0
    EC002654
  • UNSPSC 20.0
    39121008

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo