Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2902033 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2902033 Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Screw connection technology, standard configuration.
Phoenix Contact

Part#:2902033

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Screw connection technology, standard configuration.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2902033 Phoenix Contact price in the box on the right side or send a quick quote.

2902033 Product Details

  • Height
    109.81 mm
  • Maximum altitude
    ≤ 2000 m
  • Degree of protection
    IP20 (not assessed by UL)
  • Input resistance of voltage input
    > 120 kΩ
  • Contact type
    1 changeover contact
  • Setting range of the response delay
    0 s ... 10 s (can be set freely via software)
  • Typical current consumption
    40 mA (12 V DC)
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Status display
    Yellow LED (switching output)
  • Overvoltage category
    II
  • Noise emission
    EN 61000-6-4
  • Designation
    Shipbuilding approval
  • Depth
    119.2 mm
  • Noise immunity
    EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
  • max. input voltage
    12 V
  • Contact material
    AgSnO2, hard gold-plated
  • Mechanical service life
    2x 107 cycles
  • Supply voltage range
    9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
  • Max. switching current
    6 A AC (250 V AC)
  • Torque
    0.5 Nm ... 0.6 Nm
  • Conductor cross section solid
    0.2 mm² ... 1.5 mm² (with ferrule)
  • Degree of pollution
    2
  • Electromagnetic compatibility
    Conformance with EMC directive
  • Width
    6.2 mm
  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • Configurable/programmable
    Yes
  • Current input signal
    0 mA ... 20 mA (via DIP switch)
  • Max. input current
    24 mA
  • Min. switching current
    100 mA (12 V DC)
  • Power consumption
    ≤ 0.5 W
  • Conductor cross section AWG
    24 ... 12 (flexible)
  • No. of channels
    1
  • Switching point accuracy
    < 0.1 %
  • Color
    gray
  • ECLASS 5.0
    27210100
  • Input resistance current input
    approx. 50 Ω (+0.7 V for test diode)
  • Maximum switching voltage
    250 V AC
  • Nominal supply voltage
    24 V DC
  • Screw thread
    M3
  • Maximum transmission error
    0.1 % (of final value)
  • Rated insulation voltage
    300 V (effective)
  • Housing material
    PBT
  • Temperature
    B
  • EMC
    A
  • ECLASS 6.0
    27210100
  • ETIM 7.0
    EC002654
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • ECLASS 11.0
    27210122
  • Output name
    Relay output
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 2
  • ECLASS 5.1
    27210100
  • UNSPSC 7.0901
    39121008
  • UNSPSC 19.0
    39121008
  • Permissible humidity (operation)
    5 % ... 95 % (non-condensing)
  • Voltage input signal
    0 V ... 10 V (via DIP switch)
  • Electrical isolation
    Reinforced insulation in accordance with IEC 61010-1
  • Mounting position
    any
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 2
  • Identification
    UL 508 Listed
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 7.0
    27210122
  • ECLASS 9.0
    27210122
  • UNSPSC 21.0
    39121008
  • Maximum temperature coefficient
    0.01 %/K
  • Test voltage, input/output/supply
    3 kV (50 Hz, 1 min.)
  • Assembly instructions
    The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
  • Certificate
    DNV GL TAA000021E
  • Humidity
    B
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 4.0
    EC002654
  • UNSPSC 11
    39121008
  • UNSPSC 12.01
    39121008
  • Limiting continuous current
    6 A AC
  • Internal hysteresis
    can be set freely via software
  • Stripping length
    10 mm
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • ECLASS 4.0
    27210100
  • ECLASS 4.1
    27210100
  • UNSPSC 6.01
    30211506
  • UNSPSC 18.0
    39121008
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 2
  • Vibration
    A
  • ECLASS 10.0.1
    27210122
  • ETIM 6.0
    EC002654
  • UNSPSC 13.2
    39121008
  • UNSPSC 20.0
    39121008

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo