2864422 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864422 Product Details

• Height
  93.1 mm
• Description of the input
  Current input (sensor circuit)
• Transmitter supply voltage range
  14.7 V DC ... 25.5 V DC
• Load/output load current output
  ≤ 500 Ω (I = 20 mA)
• Stripping length
  12 mm
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• No. of channels
  1
• Step response (10-90%)
  approx. 3.5 ms
• Noise emission
  EN 61000-6-4
• Assembly instructions
  To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Certificate
  DNV GL TAA000020N
• Temperature
  B
• ECLASS 5.0
  27210100
• ECLASS 9.0
  27210120
• ETIM 6.0
  EC002653
• UNSPSC 13.2
  39121008
• Number of inputs
  1
• Ambient temperature (operation)
  -20 °C ... 60 °C
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Input resistance current input
approx. 50 Ω
Current output signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Max. output current
28 mA
Nominal supply voltage
24 V DC
Power consumption
< 900 mW (at 24 V DC and in repeater power supply operation)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
< 0.01 %/K
Electrical isolation
Basic insulation according to EN 61010
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Connection in acc. with standard
CUL
Vibration
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27210100
ETIM 7.0
EC002653
UNSPSC 11
39121008
UNSPSC 20.0
39121008
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m
Max. input current
28 mA
Current input signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Transmission Behavior
1:1 to input signal
Screw thread
M3
Transmission error, typical
≤ 0.1 % (of final value)
Rated insulation voltage
50 V AC/DC
Housing material
PBT
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
10 %
ECLASS 11.0
27210120
ECLASS 4.1
27210100
ECLASS 7.0
27210120
UNSPSC 12.01
39121008
UNSPSC 21.0
39121008
Depth
101.2 mm
Degree of protection
IP20
Transmitter supply voltage
UB - max. 4.5 V for load 0 mA ... 20 mA
Output name
Current output
Ripple
< 20 mVrms (at 500 Ω)
Connection method
Screw connection
Maximum transmission error
≤ 0.2 % (of final value)
Temperature coefficient, typical
< 0.002 %/K
Overvoltage category
II
Degree of pollution
2
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Identification
UL 508 Recognized
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
ECLASS 5.1
27210100
UNSPSC 7.0901
39121008
UNSPSC 18.0
39121008
Number of outputs
1
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section AWG
26 ... 12
Limit frequency (3 dB)
approx. 100 Hz
Protective circuit
Transient protection
Electromagnetic compatibility
Conformance with EMC directive
Designation
Shipbuilding approval
Humidity
B
EMC
A
ECLASS 10.0.1
27210120
ETIM 4.0
EC002653
UNSPSC 6.01
30211506
UNSPSC 19.0
39121008

Product condition