2864684 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864684 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Maximum altitude
  ≤ 2000 m
• Number of inputs
  1
• Input resistance of voltage input
  approx. 100 kΩ
• Short-circuit current
  approx. 2 mA
• Nominal supply voltage
  24 V DC
• Conductor cross section AWG
  26 ... 12
• Protective circuit
  Transient protection
• Noise emission
  EN 61000-6-4
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Designation
  Shipbuilding approval
• Certificate
  DNV GL TAA000020N
• Humidity
  B
• EMC
  A
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27210100
• ETIM 6.0
  EC002653
• UNSPSC 11
  39121008
• UNSPSC 21.0
  39121008
• Height
  93.1 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Load/output load voltage output
≥ 10 kΩ
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
No. of channels
1
Step response (10-90%)
approx. 3.2 ms
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Depth
101.2 mm
Configurable/programmable
no
Voltage input signal
0 V ... 10 V
Voltage output signal
0 V ... 10 V
Max. current consumption
< 9 mA
Screw thread
M3
Maximum temperature coefficient
< 0.01 %/K
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Connection in acc. with standard
CUL
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 5.1
27210100
ETIM 4.0
EC002653
UNSPSC 6.01
30211506
UNSPSC 19.0
39121008
Width
6.2 mm
Degree of protection
IP20
max. input voltage
30 V
Ripple
< 20 mVPP (at 10 kΩ)
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum transmission error
≤ 0.1 % (of final value)
Limit frequency (3 dB)
approx. 100 Hz
Degree of pollution
2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Typical deviation from the measuring range final value
15 %
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
27210120
ECLASS 4.1
27210100
ECLASS 9.0
27210120
UNSPSC 7.0901
39121008
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Number of outputs
1
Max. output voltage
12.5 V
Power consumption
< 200 mW (at 24 V DC)
Stripping length
12 mm
Temperature coefficient, typical
< 0.002 %/K
Electrical isolation
Basic insulation according to EN 61010
Rated insulation voltage
50 V AC/DC
Mounting position
any
Standards/regulations
EN 61000-4-6
Identification
UL 508 Recognized
Vibration
B
ECLASS 11.0
27210120
ECLASS 5.0
27210100
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121008
UNSPSC 18.0
39121008

Product condition