2864150 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864150 Product Details

• Ambient temperature (operation)
  -20 °C ... 65 °C
• Configurable/programmable
  Yes, unconfigured
• Number of outputs
  1
• Load/output load current output
  < 500 Ω (at 20 mA)
• Depth
  101.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of inputs
  1
• max. input voltage
  30 V
• Voltage output signal
  0 V ... 10 V
• Short-circuit current
  approx. 22 mA
• Supply voltage range
  19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Connection method
  Screw connection
• Temperature coefficient, typical
  < 0.002 %/K
• Rated insulation voltage
  50 V AC/DC
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Max. input current
  50 mA
• Max. output current
  28 mA
• Ripple
  < 20 mVPP (at 500 Ω)
• Power consumption
  < 450 mW (Current output)
Screw thread
M3
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Width
6.2 mm
Maximum altitude
≤ 2000 m
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Input resistance of voltage input
approx. 100 kΩ
Max. output voltage
approx. 12.5 V
Max. current consumption
< 19 mA (Current output, at 24 V DC incl. load)
Stripping length
12 mm
Maximum transmission error
≤ 0.1 % (of final value)
Maximum temperature coefficient
< 0.01 %/K
Overvoltage category
II
Color
green
Designation
Shipbuilding approval
Typical deviation from the measuring range final value
5 %
EMC
A
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27210100
ECLASS 9.0
27210120
UNSPSC 11
39121008
Height
93.1 mm
Degree of protection
IP20
Voltage input signal
0 V ... 10 V
Current input signal
0 mA ... 20 mA
Input resistance current input
approx. 50 Ω
Current output signal
0 mA ... 20 mA
Load/output load voltage output
≥ 10 kΩ
Conductor cross section AWG
26 ... 12
No. of channels
1
Step response (10-90%)
approx. 3.2 ms
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA000020N
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27210100
ECLASS 6.0
27210100
UNSPSC 6.01
30211506
UNSPSC 20.0
39121008
Nominal supply voltage
24 V DC
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Limit frequency (3 dB)
approx. 100 Hz
Electrical isolation
Basic insulation according to EN 61010
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Standards/regulations
EN 61000-4-6
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ECLASS 7.0
27210120
ETIM 6.0
EC002653
UNSPSC 7.0901
39121008
UNSPSC 19.0
39121008
Protective circuit
Transient protection
Degree of pollution
2
Noise emission
EN 61000-6-4
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Identification
UL 508 Recognized
Vibration
B
ECLASS 10.0.1
27210120
ECLASS 5.0
27210100
ETIM 7.0
EC002653
UNSPSC 18.0
39121008
UNSPSC 21.0
39121008
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Connection in acc. with standard
CUL
Humidity
B
Temperature
B
ECLASS 4.0
27210100
ETIM 4.0
EC002653
UNSPSC 12.01
39121008
UNSPSC 13.2
39121008

Product condition