2864419 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864419 Product Details

• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Number of inputs
  1
• Response current
  approx. 190 µA
• Load/output load current output
  < 600 Ω (at I = 20 mA output signal)
• Connection method
  Screw connection
• Screw thread
  M3
• No. of channels
  1
• Typical cold point errors
  ≤
• Degree of pollution
  2
• Mounting position
  any
• Designation
  Shipbuilding approval
• Certificate
  DNV GL TAA00000BW
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.1
  27210100
• ETIM 4.0
  EC002653
• UNSPSC 7.0901
  39121008
• UNSPSC 11
  39121008
• Ambient temperature (operation)
  -20 °C ... 65 °C
• Configurable/programmable
  no
Number of outputs
1
Transmission Behavior
1:1 to input signal
UNSPSC 21.0
39121008
Height
93.1 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Description of the input
Current input
max. input voltage
18 V
Input voltage limitation
< 2 V (20 mA)
Current output signal
0 mA ... 20 mA
Stripping length
12 mm
Cold junction errors
≤
Temperature coefficient, typical
< 0.002 %/K (of measured value / 100 Ω load)
Overvoltage category
II
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Vibration
B
ECLASS 5.0
27210100
ECLASS 4.1
27210100
ETIM 6.0
EC002653
UNSPSC 19.0
39121008
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Max. input current
40 mA
Voltage dissipation
1.9 V (I = 20 mA)
Power consumption
34 mW
Maximum transmission error
≤ 0.1 % (of final value)
Additional error, load-dependent
< 0.03 % (of measured value / 100 Ω load)
Step response (10-90%)
5 ms (at 600 Ω load)
Rated insulation voltage
50 V AC/DC
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Connection in acc. with standard
CUL
Enclosure
A
ECLASS 4.0
27210100
ECLASS 7.0
27210120
UNSPSC 6.01
30211506
UNSPSC 13.2
39121008
Depth
101.2 mm
Degree of protection
IP20
Current input signal
0 mA ... 20 mA
Output name
Current output
Ripple
< 10 mVrms (at 600 Ω)
Supply voltage range
no separate supply voltage necessary
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
≤ 0.002 %/K (of measured value / 100 Ω load)
Electrical isolation
Basic insulation according to EN 61010
Test voltage input/output
1.5 kV (50 Hz, 1 min.)
Noise emission
EN 61000-6-4
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Evaluation criterion
A
Humidity
B
Temperature
B
ECLASS 10.0.1
27210120
ECLASS 9.0
27210120
UNSPSC 12.01
39121008
UNSPSC 18.0
39121008
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
Limit frequency (3 dB)
75 Hz
Test voltage channel/channel
1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Identification
UL 508 Recognized
EMC
B
ECLASS 11.0
27210120
ECLASS 6.0
27210100
ETIM 7.0
EC002653
UNSPSC 20.0
39121008

Product condition