Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2864370 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2864370 MCR temperature transducer, configurable, for Pt 100 temperature sensors, with screw-connection, not configured
Phoenix Contact

Part#:2864370

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: MCR temperature transducer, configurable, for Pt 100 temperature sensors, with screw-connection, not configured

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2864370 Phoenix Contact price in the box on the right side or send a quick quote.

2864370 Product Details

  • Ambient temperature (operation)
    -20 °C ... 65 °C
  • Depth
    101.2 mm
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Maximum altitude
    ≤ 2000 m
  • Configurable/programmable
    Yes
  • Max. output voltage
    approx. 12.5 V
  • Nominal supply voltage
    24 V DC
  • Max. current consumption
    < 21 mA (at 24 V DC)
  • Power consumption
    < 500 mW
  • Protective circuit
    Transient protection
  • Overvoltage category
    II
  • Housing material
    PBT
  • Standards/regulations
    EN 61000-4-6
  • Temperature
    B
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 11.0
    27210129
  • ECLASS 5.1
    27200200
  • ECLASS 9.0
    27210129
  • ETIM 3.0
    EC001446
  • ETIM 4.0
    EC001446
  • UNSPSC 7.0901
    39121008
  • UNSPSC 12.01
    39121008
  • UNSPSC 20.0
    41112105
  • UNSPSC 21.0
    41112105
  • Noise immunity
    EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
  • Sensor types (RTD) that can be used
    Pt 100 (IEC 60751/EN 60751)
  • Voltage output signal
    0 V ... 10 V
  • Load/output load voltage output
    > 10 kΩ
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Maximum temperature coefficient
    < 0.02 %/K
  • Electrical isolation
    Basic insulation according to EN 61010
  • Rated insulation voltage
    50 V AC/DC
  • Color
    green
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 2
  • Typical deviation from the measuring range final value
    10 %
  • ECLASS 10.0.1
    27210129
  • ECLASS 5.0
    27200200
  • ECLASS 6.0
    27200200
  • UNSPSC 13.2
    41112105
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Sensor input current
    1 mA (constant)
  • Temperature measuring range
    -50 °C ... 200 °C
  • Connection technology
    2-, 3-, 4-conductor
  • Short-circuit current
    approx. 10 mA
  • Ripple
    < 20 mVPP (at 500 Ω)
  • Screw thread
    M3
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Degree of pollution
    2
  • Noise emission
    EN 61000-6-4
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 2
  • Identification
    UL 508 Recognized
  • Humidity
    B
  • UNSPSC 6.01
    30211506
  • ETIM 7.0
    EC002919
  • UNSPSC 11
    39121008
  • Width
    6.2 mm
  • Degree of protection
    IP20
  • Number of outputs
    1
  • Current output signal
    0 mA ... 20 mA
  • Load/output load current output
    < 500 Ω (at 20 mA)
  • Stripping length
    12 mm
  • Transmission error in the set measuring range
    ((50 K / Δ Temp)+ 0.05)%
  • Transmission error in the full measuring range
    ≤ 0,25 %
  • Test voltage, input/output/supply
    1.5 kV (50 Hz, 1 min.)
  • Mounting position
    any
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 2
  • Connection in acc. with standard
    CUL
  • Vibration
    B
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.0
    27200200
  • ECLASS 7.0
    27200206
  • ETIM 2.0
    EC001446
  • Height
    93.1 mm
  • Permissible humidity (operation)
    5 % ... 95 % (non-condensing)
  • Max. output current
    23 mA
  • Supply voltage range
    19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
  • Conductor cross section AWG
    26 ... 12
  • Electromagnetic compatibility
    Conformance with EMC directive
  • Designation
    Shipbuilding approval
  • Certificate
    DNV GL TAA00002R0
  • EMC
    A
  • ECLASS 4.1
    27200200
  • ETIM 6.0
    EC002919
  • UNSPSC 18.0
    41112105
  • UNSPSC 19.0
    41112105

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo