2864079 Phoenix Contact Electrical Measuring & Monitoring Instruments

2864079 Product Details

• Ambient temperature (operation)
  -20 °C ... 60 °C
• Description of the input
  Current input (sensor circuit)
• Output name
  Current output
• Max. output current
  > 21 mA (22.5 mA, typical)
• Supply voltage range
  20.4 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Ripple
  < 20 mVrms (at 500 Ω)
• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Max. input current
  28 mA
• Current output signal
  4 mA ... 20 mA (repeater power supply and isolator operation)
• Connection method
  Screw connection
• No. of channels
  1
• Maximum temperature coefficient
  < 0.005 %/K
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Current input signal
  4 mA ... 20 mA (repeater power supply and isolator operation)
• Load/output load current output
  ≤ 500 Ω (I = 20 mA)
• Nominal supply voltage
  24 V DC
Screw thread
M3
Height
93.1 mm
Number of inputs
1
Input resistance current input
approx. 50 Ω
Number of outputs
1
Stripping length
12 mm
Power consumption
< 900 mW (at 24 V DC and in repeater power supply operation)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Step response (10-90%)
< 2 ms (typ.)
Mounting position
any
Depth
101.2 mm
Degree of protection
IP20
Transmitter supply voltage
16.5 V
Transmission Behavior
1:1 to input signal
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum transmission error
≤ 0.2 % (of final value)
Electrical isolation
Basic insulation according to EN 61010
Rated insulation voltage
50 V AC/DC
Color
green
Humidity
B
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Enclosure
A
ECLASS 5.1
27210100
UNSPSC 21.0
39121008
Temperature coefficient, typical
< 0.002 %/K
Protective circuit
Transient protection
Transmission error, typical
≤ 0.1 % (of final value)
Limit frequency (3 dB)
approx. 2.5 Hz
Overvoltage category
II
Housing material
PBT
EMC
A
ECLASS 4.1
27210100
ECLASS 6.0
27210100
ETIM 4.0
EC002653
UNSPSC 6.01
30211506
UNSPSC 12.01
39121008
Noise emission
EN 61000-6-4
Typical deviation from the measuring range final value
3 %
Designation
Shipbuilding approval
Vibration
B
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27210120
ETIM 6.0
EC002653
UNSPSC 18.0
39121008
Conductor cross section AWG
26 ... 12
Degree of pollution
2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Temperature
B
Certificate
DNV GL TAA00000N1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
ECLASS 5.0
27210100
ETIM 7.0
EC002653
UNSPSC 7.0901
39121008
UNSPSC 19.0
39121008
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Identification
UL 508 Listed
Standards/regulations
EN 61000-4-6
ECLASS 11.0
27210120
ECLASS 10.0.1
27210120
ECLASS 7.0
27210120
UNSPSC 11
39121008
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008

Product condition