2716101 Phoenix Contact Terminal Blocks

2716101 Product Details

• Color
  blue
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Tensile test result
  Test passed
• Requirements, voltage drop
  ≤ 3.2 mV
• Short-time current
  0.3 kA
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Width
  6.2 mm
• Conductor cross section flexible max.
  2.5 mm²
• Cross section with insertion bridge, solid max.
  4 mm²
• 2 conductors with same cross section, stranded min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1 mm²
• Stripping length
  8 mm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.0
  27141100
ETIM 2.0
EC000900
ETIM 6.0
EC000900
Nominal cross section
2.5 mm²
Rated surge voltage
4 kV
Maximum load current
30 A (with 4 mm² conductor cross section)
Flammability rating according to UL 94
V2
Nominal current IN
24 A
Open side panel
No
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Tight fit on carrier
NS 35
Requirement, voltage drop 2nd level
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Shock form
Half-sine
Static insulating material application in cold
-40 °C
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Tightening torque max
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141128
ECLASS 4.1
27141100
ETIM 7.0
EC000900
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of levels
3
Insulating material
PA
Degree of pollution
3
Connection in acc. with standard
CSA
Nominal voltage UN
250 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
72.5 mm
Height NS 35/15
62 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141128
ETIM 4.0
EC000900
UNSPSC 6.01
30211811
Number of connections
6
Overvoltage category
III
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Relative insulation material temperature index (Elec.; UL 746 B)
125 °C
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Tightening torque, min
0.5 Nm
ECLASS 5.1
27141100
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Surge voltage test setpoint
4.8 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Shock duration
18 ms
Height NS 35/7,5
54.5 mm
Connection method
Screw connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141128
ECLASS 9.0
27141128
ETIM 3.0
EC000900
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410

Product condition