2716732 Phoenix Contact Terminal Blocks
Part#:2716732
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 7
Nov 22, 2024
Device terminal block, for direct mounting, 5-pos.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2716732 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of connections 10
- Color gray
- Insulating material PA
- Insulating material group I
- Finger protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of temperature-rise test Test passed
- Tensile test result Test passed
- Short-time current 1.2 kA
- Shock form Half-sine
- Width 68 mm
- Screw thread M4
- Connection in acc. with standard CSA
- Number of levels 1
- Potentials 5
- Rated surge voltage 8 kV
- Open side panel No
- Result of surge voltage test Test passed
- Power frequency withstand voltage setpoint 2 kV
- Bending test turns 135
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Relative insulation material temperature index (Elec., UL 746 B) 125 °C
- Static insulating material application in cold -60 °C
- ECLASS 10.0.1 27141120
- Number of positions 5
- Flammability rating according to UL 94 V2
- Maximum power dissipation for nominal condition 1.82 W
- Nominal voltage UN 800 V
- Back of the hand protection guaranteed
- Shock duration 18 ms
- Height 31 mm
- Tightening torque max 1.8 Nm
- Conductor cross section AWG max. 6
- Nominal cross section 10 mm²
- Degree of pollution 3
- Overvoltage category III
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Number of shocks per direction 3
- Length 33 mm
- Stripping length 12 mm
- Tightening torque, min 1.5 Nm
- Conductor cross section solid min. 0.5 mm²
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Connection method Screw connection
- Conductor cross section solid max. 16 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- 2 conductors with same cross section, solid max. 6 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27141100
- ETIM 3.0 EC001284
- Nominal current IN 57 A
- Result of voltage-drop test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Conductor cross section flexible min. 0.5 mm²
- Max. AWG conductor cross section, flexible 8
- 2 conductors with same cross section, solid min. 0.5 mm²
- 2 conductors with same cross section, stranded max. 6 mm²
- Internal cylindrical gage A3
- REACh SVHC Lead 7439-92-1
- Result of flexion and pull-out test Test passed
- Result of power-frequency withstand voltage test Test passed
- Short circuit stability result Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test duration per axis 5 h
- Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.1 27141100
- ECLASS 9.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121409
- Maximum load current 76 A (with 16 mm² conductor cross section)
- Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
- Conductor cross section short circuit testing 10 mm²
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Conductor cross section AWG min. 20
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 6 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 6 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ETIM 2.0 EC001284
- Surge voltage test setpoint 9.6 kV
- Bending test rotation speed 10 rpm
- Test spectrum Service life test category 2, bogie-mounted
- Acceleration 30g
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm²
- 2 conductors with same cross section, stranded min. 0.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 7.0 27141106
- ETIM 6.0 EC001284
- ECLASS 6.0 27141100
- ETIM 4.0 EC001284
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- ECLASS 4.0 27141100
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
- ETIM 7.0 EC001284
- UNSPSC 19.0 39121410
- ECLASS 5.1 27141100
- UNSPSC 18.0 39121410
- UNSPSC 7.0901 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$35.41
Stock:
7
Select Qty:
$35.41
$35.41 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨