2320830 Phoenix Contact AC/DC Power Supplies

2320830 Product Details

• Width
  120 mm
• Depth
  125 mm
• Degree of protection
  IP20
• Installation height
  ≤ 2000 m
• Height
  130 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• AC frequency range
  45 Hz ... 65 Hz
• Mains buffering time
  typ. 20 ms (400 V AC)
• Recommended breaker for input protection
  10 A ... 16 A (Characteristic B, C)
• Selective Fuse Breaking (ISFB)
  120 A (20 ms)
• POWER BOOST (IBoost)
  26 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Max. capacitive load
  unlimited
• Maximum power dissipation in no-load condition
  11 W
• Efficiency
  > 92 % (600 V DC)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Connection method
  Screw connection
• Conductor cross section AWG max.
  10
• Standard - Electrical safety
  EN 60950-1/VDE 0805 (SELV)
• Rail applications
  EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
ECLASS 5.1
27049000
ECLASS 9.0
27040701
ETIM 7.0
EC002540
UNSPSC 11
39121004
UNSPSC 20.0
39121004
Installation distance top/bottom
50 mm / 50 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
2x 360 V AC ... 575 V AC
Current consumption
2.5 A (400 V AC)
Type of protection
Transient surge protection
Nominal output current (IN)
20 A (-25 °C ... 60 °C)
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
< 35 V DC
Feedback voltage resistance
< 35 V DC
Active current limitation
Approx. 27 A
Insulation voltage input/output
1.5 kV AC (type test)
Insulation voltage input / PE
4 kV AC (type test)
Insulation voltage output / PE
500 V DC (routine test)
Conductor cross section solid max.
6 mm²
Stripping length
8 mm
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
ECLASS 4.0
27040700
ECLASS 5.0
27049000
ECLASS 7.0
27049002
ETIM 4.0
EC002540
UNSPSC 7.0901
39121004
UNSPSC 21.0
39121004
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Installation distance right/left
5 mm / 5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Frequency range DC
0 Hz
Input fuse
3.15 A (slow-blow, internal)
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (UIN ≥ 360 V AC / 480 V DC)
Connection in series
yes
Residual ripple
< 50 mVPP (with nominal values)
Output power
480 W
Peak switching voltages nominal load
< 50 mVPP (20 MHz)
Protection class
I
Housing material
Steel sheet, zinc-plated
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-17
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
ECLASS 11.0
27040701
ECLASS 6.0
27049000
ETIM 3.0
EC001039
UNSPSC 12.01
39121004
UNSPSC 18.0
39121004
Nominal input voltage range
2x 400 V AC ... 500 V AC
Nominal power consumption
888 VA
Inrush current
< 85 A (typical)
Nominal output voltage
24 V DC ±1 %
Derating
60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Power loss nominal load max.
51 W
Net weight
2 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
ECLASS 10.0.1
27040701
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27040700
ETIM 6.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 19.0
39121004
UNSPSC 13.2
39121004

Product condition