2320571 Phoenix Contact Buffer Modules

2320571 Product Details

• Width
  118 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Voltage type of supply voltage
  DC
• Connection in parallel
  no
• Dynamic Boost (IDyn.Boost)
  20 A (5 s)
• Connection method
  MINI-USB Type B
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (> 40 °C Derating: 1 %/K)
• Ambient temperature (storage/transport)
  -40 °C ... 60 °C
• Fixed backup threshold
  < 22 V DC
• Buffer time
  5 min. (1 A)
• Output current IN
  10 A (depending on output current)
• Idling-proof
  yes
• Nominal load power dissipation
  6 W
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Flexible conductor cross section (ferrule with plastic sleeve)
  0.2 mm² ... 0.75 mm²
• Connection marking
  5.1
• Topology
  Point-to-point
• Noise emission
  EN 55016
Voltage
10 V
Conducted interference
EN 61000-4-6
ECLASS 7.0
27040603
UNSPSC 18.0
26111710
Degree of protection
IP20
Input voltage
24 V DC (SELV)
Input voltage range
22.5 V DC ... 30 V DC
Recharging time
approx. 12 min.
Short-circuit-proof
yes
Efficiency
> 97 % (with charged energy storage device)
Stripping length
8 mm
Torque
0.5 Nm ... 0.6 Nm
Number of interfaces
1
Locking
Screw
Frequency range
0.15 MHz ... 80 MHz
Criterion A
Normal operating behavior within the specified limits.
ECLASS 6.0
27040600
ETIM 7.0
EC002850
UNSPSC 19.0
26111710
Height
130 mm
Max. permissible relative humidity (operation)
≤ 95 %
Degree of pollution
2
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
0.1 A (No-load)
Charging time
approx. 22 min.
Static Boost (IStat.Boost)
12.5 A
MTBF (IEC 61709, SN 29500)
1387186 h (40 °C)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
EMC requirements for noise emission
EN 61000-6-3
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27242700
ETIM 6.0
EC002850
UNSPSC 20.0
26111710
Depth
125 mm
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 4000 m
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max)
13.5 A (max.)
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
1 A (charging process)
Connection in series
No
Output voltage
22 V DC (typical)
Net weight
1.6 kg
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Interface
USB (Modbus/RTU)
Transmission physics
USB 2.0
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27049201
UNSPSC 13.2
39121004
UNSPSC 21.0
26111710
Protection class
III (Special application (SELV input voltage, hazardous voltages are generated in the device).)
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27242700

Product condition