2320393 Phoenix Contact Buffer Modules

2320393 Product Details

• Width
  64 mm
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  18 V DC ... 30 V DC
• Nominal output current (IN)
  40 A
• Protection class
  III
• Connection method
  Screw connection
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section AWG max.
  12
• Output name
  Power Good signal output active (high = buffer module charged)
• Note on status display
  Buffer module is loaded: LED ON
• Standard - Electrical safety
  EN 60950-1/VDE 0805 (SELV)
• Electrostatic discharge
  EN 61000-4-2
• Test field strength
  10 V/m
• Surge voltage load (surge)
  EN 61000-4-5
• Criterion A
  Normal operating behavior within the specified limits.
• ECLASS 4.0
  27040700
• Width with alternative assembly
  122 mm
• Installation distance top/bottom
  50 mm / 50 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage
24 V DC
Fixed backup threshold
< 20 V DC (< 22 V; < 24 V; < 26 V)
IQ technology
no
MTBF (IEC 61709, SN 29500)
> 902000 h (40 °C)
Conductor cross section solid max.
4 mm²
Screw thread
M4
Continuous load current
20 mA
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 19.0
26111710
Depth
125 mm
Height with alternative assembly
130 mm
Degree of protection
IP20
Degree of pollution
2
Current consumption (charging process)
0.7 A (charging process)
Variable connect threshold
(UIN - 1 V)/0.1 s
Net weight
1.1 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible max.
2.5 mm²
Output description
Power Good
Tightening torque, min
0.5 Nm
Standard - Safe isolation
DIN VDE 0106-101
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 2 - symmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27049200
ECLASS 9.0
27049201
ETIM 6.0
EC002850
UNSPSC 6.01
30211510
UNSPSC 12.01
39121011
Height
130 mm
Depth with alternative assembly
67 mm
Ambient temperature (operation)
-25 °C ... 80 °C
Installation height
2000 m
Current consumption (maximum)
45 A (Conduction current)
Nominal output voltage
24 V DC
Efficiency
> 99 % (Mains operation, with charged energy storage)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Status display
LED "Power Good", green
Standard - Safety of transformers
EN 61558-2-17
Standard – Safety extra-low voltage
EN 60950-1 (SELV) and EN 60204 (PELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
ECLASS 4.1
27040700
ECLASS 5.0
34174000
ETIM 4.0
EC000599
UNSPSC 7.0901
39121011
UNSPSC 13.2
39121011
Current consumption (idle)
0.1 A (No-load)
Output voltage range (depends on the input voltage)
19.2 V DC ... 27.6 V DC
Memory medium
Electrolytic capacitor
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Stripping length
10 mm
Output voltage
+ 24 V
Tightening torque max
0.6 Nm
UL approvals
UL/C-UL Recognized UL 60950-1
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 5.1
34174000
ETIM 3.0
EC001039
ECLASS 7.0
27049201
ETIM 7.0
EC002850
UNSPSC 11
39121011
UNSPSC 21.0
26111710
UNSPSC 18.0
26111710
UNSPSC 20.0
26111710

Product condition