1627785 Phoenix Contact Electrical Wires & Cables

1627785 Product Details

• Type
  rear protective cover screw connection
• Standards/regulations
  IEC 62196-2
• Width
  75 mm
• Cable structure
  4 x 0.5 mm²
• Max. altitude
  5000 m (above sea level)
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated voltage for power contacts
  480 V AC
• Insertion/withdrawal cycles
  > 10000
• Mounting position of the locking actuator
  Top center
• Customer variations
  On request
• Number of positions of theconnectors
  4
• Reverse current of the motor
  max. 1 A
• Max. dwell time with reverse current
  1000 ms
• China RoHS
  Environmentally Friendly Use Period = 10;
• ECLASS 10.0.1
  27144706
• ECLASS 6.0
  27143400
• Design
  Generation 1
• Charging standard
  Type 2
• Depth
  76.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
Number of phases
3
Rated voltage for signal contacts
30 V AC
Screw connection of a protective cover
Only rear mounting possible
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Recommended adaptation time
600 ms
Mechanical emergency release
available
ECLASS 5.0
27143400
ETIM 4.0
EC002061
UNSPSC 7.0901
39121522
UNSPSC 20.0
39121522
Affixed logo
“PHOENIX CONTACT” logo
Height
96 mm
Conductor length
0.7 m (AC cables)
Type of conductor
Single wires
Rated current of power contacts
32 A
Rated current for signal contacts
2 A
Withdrawal force
< 100 N (Optimized)
Design line
Generation 1
Locking type
Locking in the inserted state with a locking mechanism
Possible power supply range at the motor
9 V ... 16 V
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ECLASS 4.1
27140800
UNSPSC 11
39121522
UNSPSC 18.0
39121522
Application
For charging electric vehicles (EV) with alternating current (AC)
Note on the connection method
Crimp connection, cannot be disconnected
Bore dimensions
60 mm x 60 mm
Maximum charging power
22 kW
Type of charging current
AC 3-phase
Type of signal transmission
Pulse width modulation
Possible mounting positions
Rear panel mounting
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Mounting hole diameter
7.00 mm (ø)
Material surface of contacts
Ag
Maximum voltage for locking detection
30 V
Cable length
0.5 m
Lock recognition
available
ECLASS 4.0
27140800
ECLASS 7.0
27449001
UNSPSC 6.01
30211923
UNSPSC 19.0
39121522
UNSPSC 21.0
39121522
Charging mode
Mode 3, Case B
Ambient temperature (operation)
-30 °C ... 50 °C
Degree of protection
IP44 (plugged in)
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N (Optimized)
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material
Plastic
Typical motor current for locking
0.2 A
Pause time after entry or exit path
3 s
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27143400
ECLASS 9.0
27144706
UNSPSC 13.2
39121522
ETIM 3.0
EC002061
ETIM 6.0
EC002898
ETIM 7.0
EC002898
UNSPSC 12.01
39121522

Product condition