1627987 Phoenix Contact Electrical Wires & Cables

1627987 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Note on the connection method
  Crimp connection, cannot be disconnected
• Bore dimensions
  60 mm x 60 mm
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Type
  front protective cover screw connection
• Charging standard
  Type 2
• Depth
  76.2 mm
• Degree of protection
  IP44 (plugged in)
• Rated voltage for power contacts
  480 V AC
• Insertion/withdrawal cycles
  > 10000
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Housing color
  black
• Locking type
  Locking in the inserted state with a locking mechanism
• Max. dwell time with reverse current
  1 s
• Pause time after entry or exit path
  3 s
• ECLASS 4.0
  27140800
• ECLASS 6.0
  27143400
• ECLASS 9.0
  27144706
• Standards/regulations
  IEC 62196-2
• Cable structure
  4 x 0.5 mm²
Max. altitude
5000 m (above sea level)
Type of charging current
AC 3-phase
Rated current of power contacts
32 A
Insertion force
< 100 N (Optimized)
Screw connection of a protective cover
Only possible on the front
Material
Plastic
Possible power supply range at the motor
22 V ... 26 V
Reverse current of the motor
max. 0.5 A
Service life insertion cycles
> 10000 load cycles
ECLASS 10.0.1
27144706
ECLASS 5.0
27143400
ETIM 7.0
EC002898
UNSPSC 13.2
39121522
Design
Generation 1 Easy Mount
Charging mode
Mode 3, Case B
Width
75 mm
Type of conductor
Single wires
Number of signal contacts
2 (CP, PP)
Rated current for signal contacts
2 A
Withdrawal force
< 100 N (Optimized)
Customer variations
On request
Number of positions of theconnectors
4
Typical motor current for locking
0.05 A
Lock recognition
available
ECLASS 11.0
27144706
ECLASS 4.1
27140800
ETIM 6.0
EC002898
UNSPSC 7.0901
39121522
UNSPSC 19.0
39121522
UNSPSC 21.0
39121522
Affixed logo
“PHOENIX CONTACT” logo
Height
96 mm
Conductor length
0.7 m (AC cables)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
22 kW
Number of phases
3
Type of signal transmission
Pulse width modulation
Mounting hole diameter
7.00 mm (ø)
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Operating voltage
24 V (Typical power supply at the motor)
Maximum voltage for locking detection
30 V
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 7.0
27449001
ETIM 4.0
EC002061
UNSPSC 11
39121522
UNSPSC 18.0
39121522
Number of power contacts
5 (L1, L2, L3, N, PE)
Rated voltage for signal contacts
30 V AC
Possible mounting positions
Rear panel mounting
Mounting position of the locking actuator
Top center
Design line
Generation 1 Easy Mount
Material surface of contacts
Ag
Recommended adaptation time
600 ms
Mechanical emergency release
available
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27143400
ETIM 3.0
EC002061
UNSPSC 6.01
30211923
UNSPSC 12.01
39121522
UNSPSC 20.0
39121522

Product condition