1627945 Phoenix Contact Electrical Wires & Cables

1627945 Product Details

• Type
  rear protective cover screw connection
• Standards/regulations
  IEC 62196-2
• Depth
  76.2 mm
• Width
  75 mm
• Max. altitude
  5000 m (above sea level)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated current of power contacts
  20 A
• Rated voltage for signal contacts
  30 V AC
• Possible mounting positions
  Rear panel mounting
• Design line
  Generation 1
• Material surface of contacts
  Ag
• Recommended adaptation time
  600 ms
• Lock recognition
  available
• ECLASS 10.0.1
  27144706
• ECLASS 6.0
  27143400
• ETIM 3.0
  EC002061
• UNSPSC 13.2
  39121522
• Charging mode
  Mode 3, Case B
• Cable structure
  4 x 0.5 mm²
Type of charging current
AC 3-phase
Type of signal transmission
Pulse width modulation
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Customer variations
On request
Maximum voltage for locking detection
30 V
Pause time after entry or exit path
3 s
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 9.0
27144706
ETIM 7.0
EC002898
UNSPSC 11
39121522
UNSPSC 20.0
39121522
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging standard
Type 2
Bore dimensions
60 mm x 60 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Maximum charging power
13.8 kW
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N
Mounting hole diameter
7.00 mm (ø)
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Possible power supply range at the motor
9 V ... 16 V
Mechanical emergency release
available
ECLASS 4.0
27140800
ECLASS 5.1
27143400
ETIM 4.0
EC002061
UNSPSC 12.01
39121522
UNSPSC 18.0
39121522
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Type of conductor
Single wires
Rated voltage for power contacts
480 V AC
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Number of positions of theconnectors
4
Typical motor current for locking
0.2 A
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ECLASS 4.1
27140800
UNSPSC 7.0901
39121522
UNSPSC 6.01
30211923
UNSPSC 21.0
39121522
Design
Generation 1
Height
96 mm
Conductor length
0.5 m (AC cables)
Degree of protection
IP44 (plugged in)
Number of phases
3
Rated current for signal contacts
2 A
Insertion/withdrawal cycles
> 10000
Screw connection of a protective cover
Only rear mounting possible
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1 A
Max. dwell time with reverse current
1000 ms
ECLASS 5.0
27143400
ECLASS 7.0
27449001
ETIM 6.0
EC002898
UNSPSC 19.0
39121522

Product condition