1534452 Phoenix Contact Data & Networking Devices

Product Details

• Contact carrier material
  PA 6.6
• Cable structure
  2xAWG24/19+2xAWG22/19
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Number of positions
  5
• Signal type/category
  CANopen®
• Insertion/withdrawal cycles
  > 100
• Wire colors
  Red-black, blue-white
• Shielding
  Tinned copper braided shield
• Overall twist
  2 pairs around a drain wire in the center to the core
• External sheath, color
  violet RAL 4001
• Minimum bending radius, fixed installation
  5 x D
• Acceleration
  3 m/s²
• Length of cable
  5 m
• Rated surge voltage
  1.5 kV
• Degree of pollution
  3
• Contact material
  CuZn
• Standards/specifications
  M12 connector IEC 61076-2-101
• Cable type
  CANopen®/DeviceNet™, PUR, violet
• Conductor structure, voltage supply
  19x 0.15 mm
Traversing rate
3 m/s
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Halogen-free
in accordance with DIN VDE 0472 part 815
Shielded
yes
Sealing material
FKM
UL AWM style
21198 (80°C/300 V)
AWG power supply
22
UNSPSC 18.0
39121413
Insulation resistance
≥ 5 GΩ*km (Data cable)
Status display
No
Torque
2 Nm ... 3 Nm (Installation-side)
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
External cable diameter D
6.7 mm ±0.3 mm
Traversing path
4.5 m
Material conductor insulation
Foamed PE (Data cable)
Loop resistance
≤ 181.80 Ω/km (Data cable)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ECLASS 6.0
27279200
ETIM 4.0
EC000830
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Rated voltage
48 V AC
Test voltage
2500 V
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor structure signal line
19x 0.13 mm
Twisted pairs
2 cores to the pair
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Minimum bending radius, drag chain applications
10 x D
Degree of protection
IP67 (When plugged in)
Coding
A - standard
Overvoltage category
II
Flammability rating according to UL 94
V0
Material, knurls
Nickel-plated brass
Cable type (abbreviation)
920
AWG signal line
24
Conductor cross section
2x 0.25 mm² (Data cable)
Optical shield covering
80 %
Number of bending cycles
5000000
Bending radius
70 mm
Conductor material
Tin-plated Cu litz wires
Minimum bending radius, flexible installation
10 x D
Outer sheath, material
PUR
Wave impedance
120 Ω ±10 % (with 1 MHz)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 4.0
27140800
ECLASS 5.1
27143400
ETIM 3.0
EC002061
UNSPSC 20.0
39121413
UNSPSC 11
31251501
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Cable capacity
nom. 40 nF/km (Data cable)
ECLASS 7.0
27440103
UNSPSC 6.01
31251501
ECLASS 11.0
27440102
ETIM 2.0
EC001297
UNSPSC 13.2
39121413
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
ECLASS 10.0.1
27440102
Cable weight
90 kg/km
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Other resistance
Low adhesion
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 7.0901
31251501
ECLASS 4.1
27140800
ECLASS 9.0
27440102
ETIM 6.0
EC002061
UNSPSC 19.0
39121413