1534465 Phoenix Contact Data & Networking Devices

Product Details

• ECLASS 5.0
  27143400
• ECLASS 9.0
  27440102
• UNSPSC 11
  31251501
• UNSPSC 18.0
  39121413
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Conductor structure signal line
  19x 0.13 mm
• Twisted pairs
  2 cores to the pair
• Optical shield covering
  80 %
• Bending radius
  70 mm
• Cable weight
  90 kg/km
• ECLASS 4.0
  27140800
• ECLASS 11.0
  27440102
• ECLASS 7.0
  27440103
• ETIM 6.0
  EC002061
• UNSPSC 12.01
  31251501
• UNSPSC 21.0
  39121413
• Sealing material
  FKM
• Cable type (abbreviation)
  920
• Conductor cross section
  2x 0.25 mm² (Data cable)
• Overall twist
  2 pairs around a drain wire in the center to the core
External cable diameter D
6.7 mm ±0.3 mm
Traversing path
4.5 m
Material conductor insulation
Foamed PE (Data cable)
Attenuation
≤ 22.9 dB/km (with 1 MHz)
ECLASS 6.0
27279200
ETIM 4.0
EC000830
Standards/specifications
M12 connector IEC 61076-2-101
Cable type
CANopen®/DeviceNet™, PUR, violet
AWG signal line
24
Shielding
Tinned copper braided shield
External sheath, color
violet RAL 4001
Acceleration
3 m/s²
Outer sheath, material
PUR
Wave impedance
120 Ω ±10 % (with 1 MHz)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413
Contact surface material
Ni/Au
Cable structure
2xAWG24/19+2xAWG22/19
AWG power supply
22
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Wire colors
Red-black, blue-white
Minimum bending radius, flexible installation
10 x D
Traversing rate
3 m/s
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Shielded
yes
ECLASS 4.1
27140800
ETIM 2.0
EC001297
UNSPSC 6.01
31251501
UNSPSC 13.2
39121413
UNSPSC 20.0
39121413
Material, knurls
Nickel-plated brass
UL AWM style
21198 (80°C/300 V)
Conductor structure, voltage supply
19x 0.15 mm
Minimum bending radius, fixed installation
5 x D
Minimum bending radius, drag chain applications
10 x D
Number of bending cycles
5000000
Conductor material
Tin-plated Cu litz wires
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Test voltage
2500 V
Insertion/withdrawal cycles
> 100
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Degree of protection
IP67 (When plugged in)
Number of positions
5
Signal type/category
CANopen®
Coding
A - standard
Flammability rating according to UL 94
V0
Length of cable
0.5 m
Standards/regulations
M12 connector IEC 61076-2-101
Rated surge voltage
1.5 kV
Degree of pollution
3
Contact carrier material
PA 6.6
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Insulation resistance
≥ 5 GΩ*km (Data cable)
Status display
No
Contact material
CuZn
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Rated voltage
48 V AC
Overvoltage category
II
Torque
2 Nm ... 3 Nm (Installation-side)
Cable capacity
nom. 40 nF/km (Data cable)
Halogen-free
in accordance with DIN VDE 0472 part 815
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
REACh SVHC
Lead 7439-92-1
Other resistance
Low adhesion
China RoHS
Environmentally Friendly Use Period = 50 years