1534614 Phoenix Contact Data & Networking Devices
Part#:1534614
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, rear/screw mounting with M16 thread, with 5 m bus cable, 2 x 2 x 0.14 mm²
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1534614 Phoenix Contact price in the box on the right side or send a quick quote.
1534614 Product Details
- Sealing material NBR
- AWG signal line 26
- External sheath, color water blue RAL 5021
- Cable weight 42 kg/km
- Near end crosstalk attenuation (NEXT) 65.3 dB (with 1 MHz)
- ECLASS 9.0 27440102
- UNSPSC 11 31251501
- Length of cable 5 m
- Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
- Status display No
- Material, knurls Nickel-plated brass
- Insulation resistance ≥ 500 MΩ*km
- Overvoltage category II
- Transmission characteristics (category) CAT5
- Loop resistance ≤ 290.00 Ω/km
- ECLASS 4.1 27140800
- ETIM 3.0 EC002061
- Contact carrier material PA 6.6
- UNSPSC 7.0901 31251501
- UNSPSC 19.0 39121413
- Conductor cross section 2x 2x 0.14 mm²
- Wire colors white/orange-orange, white/green-green
- Core diameter including insulation 0.98 mm
- Optical shield covering 70 %
- Conductor material Bare Cu litz wires
- Contact material CuZn
- Standards/specifications Electrical requirements EN 50288-2-2
- Cable structure 2x2xAWG26/7; SF/UTP
- Twisted pairs 2 cores to the pair
- Tensile strength GRP ≤ 80 N
- Material conductor insulation Foamed PE
- ECLASS 4.0 27140800
- ECLASS 7.0 27440103
- ECLASS 5.1 27143400
- ETIM 4.0 EC000830
- Flammability rating according to UL 94 V0
- UL AWM style 20963 (80°C/30 V)
- Cable type Ethernet flexible CAT5, 2-pair
- Overall twist Two pairs with two fillers to the core
- Outer sheath, material PUR
- Signal runtime 5.3 ns/m
- ECLASS 5.0 27143400
- ETIM 2.0 EC001297
- Number of positions 4
- Minimum bending radius, fixed installation 4 x D
- Degree of pollution 3
- ECLASS 6.0 27279200
- ETIM 6.0 EC002061
- Outer sheath thickness 1.2 mm
- Minimum bending radius, flexible installation 8 x D
- Wave impedance 100 Ω ±5 Ω (at 100 MHz)
- Shielded yes
- Standards/regulations M12 connector IEC 61076-2-101
- Test voltage 2500 V
- Cable type (abbreviation) 93E
- UNSPSC 12.01 31251501
- Conductor structure signal line 7x 0.16 mm
- Shielding Aluminum-coated foil, tinned copper braided shield
- Coding D - data
- Attenuation 3.2 dB (with 1 MHz)
- External cable diameter D 6.4 mm ±0.2 mm
- Cable capacity approx. 45 nF/km (at 1 kHz)
- Rated voltage 48 V AC
- Degree of protection IP67 (When plugged in)
- Coupling resistance ≤ 100.00 mΩ/m (at 10 MHz)
- Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
- Power-summated near end crosstalk attenuation (PSNEXT) 62.3 dB (with 1 MHz)
- Test voltage Core/Shield 700 V (50 Hz, 1 min.)
- Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
- UNSPSC 18.0 39121413
- UNSPSC 20.0 39121413
- Contact surface material Ni/Au
- Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
- UNSPSC 21.0 39121413
- Test voltage Core/Core 700 V (50 Hz, 1 min.)
- UNSPSC 6.01 31251501
- Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps
- UNSPSC 13.2 39121413
- Resistance to oil according to EN 60811-2-1
- REACh SVHC Lead 7439-92-1
- Halogen-free according to IEC 60754-1
- China RoHS Environmentally Friendly Use Period = 50 years
- Flame resistance according to IEC 60332-1-2
- Ambient temperature (storage/transport) -20 °C ... 80 °C
- Ambient temperature (installation) -20 °C ... 80 °C
- Current carrying capacity of cable 2 A (according to DIN VDE 0891-1)
- Return loss (RL) 23 dB (at 4 МHz)
- Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications)
- ECLASS 10.0.1 27440102
- ECLASS 11.0 27440102
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1534614
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨