Nikki Gonzales
Nick Goetz
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

1534533 Phoenix Contact Electrical Connectors

Phoenix Contact 1534533 Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 5 m bus line
Phoenix Contact

Part#:1534533

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

About the product: Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 5 m bus line

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Connectors that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1534533 Phoenix Contact price in the box on the right side or send a quick quote.

1534533 Product Details

  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Rated surge voltage
    1.5 kV
  • Overvoltage category
    II
  • Status display
    No
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Conductor cross section
    3x 2x 0.22 mm²
  • Degree of protection
    IP67 (When plugged in)
  • Number of positions
    5
  • Degree of pollution
    3
  • Contact surface material
    Ni/Au
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Rated voltage
    48 V AC
  • Signal type/category
    INTERBUS
  • Insertion/withdrawal cycles
    > 100
  • Contact material
    CuZn
  • Sealing material
    FKM
  • Overall twist
    3 pairs to the core
  • Minimum bending radius, fixed installation
    7.5 x D
  • Number of bending cycles
    5000000
  • Bending radius
    120 mm
  • Conductor material
    Bare Cu litz wires
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Shielded
    yes
  • ECLASS 4.0
    27140800
  • ECLASS 10.0.1
    27440102
  • ETIM 4.0
    EC000830
  • ETIM 6.0
    EC002061
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Insulation resistance
    ≥ 5 GΩ*km
  • Test voltage
    2500 V
  • Material, knurls
    Nickel-plated brass
  • Conductor structure signal line
    32x 0.10 mm
  • Cable type (abbreviation)
    900
  • External cable diameter D
    8 mm
  • Traversing path
    10 m
  • Outer sheath, material
    PUR
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Test voltage Core/Core
    1500 Vrms
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 9.0
    27440102
  • UNSPSC 11
    31251501
  • UNSPSC 18.0
    39121413
  • UNSPSC 20.0
    39121413
  • Length of cable
    5 m
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Coding
    B - inverse
  • Flammability rating according to UL 94
    V0
  • Contact carrier material
    PA 6.6
  • Cable type
    INTERBUS
  • AWG signal line
    24
  • Twisted pairs
    2 cores to the pair
  • Minimum bending radius, flexible installation
    15 x D
  • Acceleration
    3.2 m/s²
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • ECLASS 11.0
    27440102
  • ECLASS 5.0
    27143400
  • ETIM 2.0
    EC001297
  • UNSPSC 7.0901
    31251501
  • UNSPSC 12.01
    31251501
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Cable structure
    3 x 2 x 0.22 mm²
  • Shielding
    Braided copper wires
  • Traversing rate
    1.6 m/s
  • Cable weight
    70 kg/km
  • Signal speed
    0.66 c
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 4.1
    27140800
  • ECLASS 7.0
    27440103
  • UNSPSC 13.2
    39121413
  • UNSPSC 6.01
    31251501
  • UNSPSC 21.0
    39121413
  • External sheath, color
    may green RAL 6017
  • Material conductor insulation
    PE
  • Loop resistance
    ≤ 159.80 Ω/km
  • Test voltage Core/Shield
    1000 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.1
    27143400
  • ECLASS 6.0
    27279200
  • ETIM 3.0
    EC002061
  • UNSPSC 19.0
    39121413

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

1534533

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo