1271832 Phoenix Contact Electrical Wires & Cables

1271832 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging mode
  Mode 2, 3
• Conductor length
  2 m (AC cables)
• Rated current of power contacts
  32 A AC
• Type of signal transmission
  Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
• Resistor coding
  4.7 kΩ (between PE and PP)
• Screws included in the scope of delivery
  none
• Customer variations
  On request
• Design
  Generation 4
• Note on the connection method
  Crimp connection, cannot be disconnected
• Max. altitude
  4000 m (above sea level)
• Rated voltage for power contacts
  250 V AC
• Insulation resistance of neighboring contacts
  > 200 MΩ
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Design line
  Generation 4
• Material
  Plastic
• Cable structure
  5 x 0,5 mm²
• Minimum bending radius
  15 mm
• ECLASS 10.0.1
  27144706
• Standards/regulations
  GB/T 20234.2-2015
Width
90 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Type of charging current
AC single-phase
Rated voltage for signal contacts
30 V AC
Temperature monitoring
AC contacts: PTC system (DIN EN 60738-1)
Withdrawal force
< 100 N
Housing color
black
External cable diameter
1.6 mm -0.2 mm
ECLASS 11.0
27144706
Charging standard
GB/T
Height
90 mm
Ambient temperature (operation)
-40 °C ... 50 °C
Maximum charging power
8 kW
Number of signal contacts
2 (CP, PP)
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Top center
Flammability rating
V0
Cable resistance
≤ 37.1 Ω/km
Type
Locking actuator right
Note
A protective cap is supplied as standard for the AC contacts.
Depth
107 mm
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Number of power contacts
5 (L1, L2, L3, N, PE)
Rated current for signal contacts
2 A
Insertion force
< 100 N
Mounting hole diameter
6.70 mm (ø)
Required mounting screws
M6
Material surface of contacts
Ag
Outer sheath, material
PVC
Locking type
Locking in the inserted state with a locking mechanism
Cable weight
7 kg/km

Product condition