1086504 Phoenix Contact Terminal Blocks
Part#:1086504
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: High-current terminal block, Terminal block for aluminum and copper conductors (AL-CU), nom. voltage: 1000 V, nominal current: 290 A, connection method: Screw connection, number of connections: 2, number of positions: 1, cross section: 35 mm² - 150 mm², A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1086504 Phoenix Contact price in the box on the right side or send a quick quote.
1086504 Product Details
- Potentials 1
- Number of levels 1
- Overvoltage category III
- Nominal voltage UN 1000 V
- Result of surge voltage test Test passed
- Tensile test result Test passed
- Number of connections 2
- Insulating material PA
- Nominal current IN 309 A
- Result of power-frequency withstand voltage test Test passed
- Bending test turns 135
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Conductor cross section short circuit testing 150 mm²
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock form Half-sine
- Note 20
- Color yellow
- Degree of pollution 3
- Maximum load current 309 A (with 150 mm² conductor cross section)
- Power frequency withstand voltage setpoint 2.2 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tractive force setpoint 427 N
- Short-time current 18 kA
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Number of shocks per direction 3
- Relative insulation material temperature index (Elec., UL 746 B) 400 °C
- Height NS 35/7,5 67 mm
- Number of positions 1
- Flammability rating according to UL 94 V0
- Insulating material group II
- Surge voltage test setpoint 9.8 kV
- Result of flexion and pull-out test Test passed
- Bending test conductor cross section/weight 35 mm² / 6.8 kg
- Tight fit on carrier NS 35
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Height 67 mm
- Tightening torque, min 20 Nm
- Conductor cross section solid max. 150 mm²
- 2 conductors with same cross section, stranded min. 35 mm²
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141120
- Nominal cross section 150 mm²
- Rated surge voltage 8 kV
- Open side panel No
- Bending test rotation speed 10 rpm
- Conductor cross section tensile test 150 mm²
- Setpoint 15 N
- Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Acceleration 30g
- Shock duration 18 ms
- Length 105.5 mm
- Connection method Screw connection
- Conductor cross section AWG min. 2
- Conductor cross section flexible max. 150 mm²
- ECLASS 5.1 27141100
- ASD level 6.12 (m/s2)2/Hz
- Shock test result Test passed
- Width 30.5 mm
- Stripping length 30 mm
- Connection in acc. with standard IEC 61238-1
- 2 conductors with same cross section, stranded max. 50 mm²
- ECLASS 11.0 27141120
- ECLASS 7.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 12.01 39121410
- Proof of thermal characteristics (needle flame) effective duration 10 s
- Conductor cross section flexible, with ferrule with plastic sleeve max. 70 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141120
- ETIM 3.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Result of tight fit on support Test passed
- Screw thread M18
- Conductor cross section solid min. 35 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 35 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 35 mm²
- ETIM 2.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 20.0 39121410
- Result of temperature-rise test Test passed
- Height NS 35/15 74.5 mm
- Tightening torque max 30 Nm
- Conductor cross section AWG max. 300
- Conductor cross section flexible min. 35 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 70 mm²
- ECLASS 4.0 27141120
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 11 39121410
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1086504
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨