1086505 Phoenix Contact Terminal Blocks

1086505 Product Details

• Number of connections
  2
• Insulating material
  PA
• Insulating material group
  II
• Rated surge voltage
  8 kV
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Tensile test result
  Test passed
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• ASD level
  6.12 (m/s2)2/Hz
• Test duration per axis
  5 h
• Width
  37.5 mm
• Stripping length
  43 mm
• Conductor cross section solid min.
  35 mm²
• Conductor cross section AWG max.
  500
• UNSPSC 21.0
  39121410
• Note
  The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Color
gray
Degree of pollution
3
Nominal voltage UN
1000 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
20 N
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Acceleration
30g
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of shocks per direction
3
Tightening torque, min
12 Nm
Screw thread
M20
Conductor cross section solid max.
240 mm²
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
120 mm²
ECLASS 9.0
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
Number of positions
1
Nominal cross section
240 mm²
Flammability rating according to UL 94
V0
Maximum load current
415 A (with 240 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Conductor cross section tensile test
240 mm²
Tight fit on carrier
NS 35
Short-time current
28.8 kA
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Shock form
Half-sine
Shock duration
18 ms
Connection method
Screw connection
Height
70 mm
Tightening torque max
45 Nm
Conductor cross section flexible max.
185 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
120 mm²
ECLASS 4.0
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of levels
1
Potentials
1
Overvoltage category
III
Nominal current IN
415 A
Back of the hand protection
guaranteed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
35 mm² / 6.8 kg
Tractive force setpoint
578 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
250 mm²
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
550 °C
Length
130 mm
Connection in acc. with standard
IEC 61238-1
Conductor cross section AWG min.
3/0
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
2 conductors with same cross section, stranded max.
70 mm²
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
ECLASS 10.0.1
27141120
2 conductors with same cross section, stranded min.
35 mm²
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410

Product condition