1086471 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  yellow
• Rated surge voltage
  8 kV
• Nominal voltage UN
  1000 V
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test turns
  135
• Tractive force setpoint
  236 N
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Conductor cross section short circuit testing
  50 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock duration
  18 ms
• Height NS 35/15
  58.5 mm
• Potentials
  1
• Insulating material
  PA
• Maximum load current
  150 A (with 50 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  10 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
400 °C
Number of positions
1
Nominal cross section
50 mm²
Degree of pollution
3
Insulating material group
II
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
50 mm²
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Acceleration
30g
Width
19.2 mm
Overvoltage category
III
Open side panel
No
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Number of connections
2
2 conductors with same cross section, stranded max.
16 mm²
ECLASS 4.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Nominal current IN
150 A
Surge voltage test setpoint
9.8 kV
Screw thread
M10
Conductor cross section solid min.
4 mm²
Conductor cross section flexible min.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Short-time current
6 kA
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Length
82.5 mm
Stripping length
23 mm
Tightening torque max
12 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Height NS 35/7,5
51 mm
Connection in acc. with standard
IEC 61238-1
Conductor cross section solid max.
50 mm²
Conductor cross section AWG max.
1/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Bending test conductor cross section/weight
2.5 mm² / 0.7 kg
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Height
51 mm
Connection method
Screw connection
Conductor cross section AWG min.
6
Tightening torque, min
4 Nm
Conductor cross section flexible max.
50 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 18.0
39121410