1082391 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Color
  green
• Overvoltage category
  III
• Insulating material group
  I
• Nominal current IN
  57 A
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  24.5 mm
• Height
  25.1 mm
• Conductor cross section solid max.
  16 mm²
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection cross sections directly pluggable
1 mm² 16 mm² 1 mm² 10 mm²
Internal cylindrical gage
A5
ECLASS 4.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Number of connections
6
Nominal cross section
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ECLASS 11.0
27141120
ECLASS 4.1
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Oscillation, broadband noise test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid min.
1 mm²
Conductor cross section AWG max.
6
Rated surge voltage
6 kV
Open side panel
No
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Flammability rating according to UL 94
V0
Maximum total current
90 A (The load current of all connected conductors must not exceed the maximum total current.)
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Width
37 mm
Stripping length
12 mm ... 14 mm
Conductor cross section AWG min.
20
Maximum load current
76 A (with a 16 mm² conductor cross section, rigid)
Nominal voltage UN
450 V
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
UNSPSC 20.0
39121410