1047497 Phoenix Contact Terminal Blocks

1047497 Product Details

• Number of connections
  7
• Color
  white
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Nominal cross section feed-in
  4 mm²
• Overvoltage category
  III
• Maximum total current
  41 A
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Tight fit on carrier
  NS 35/NS 15
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Static insulating material application in cold
  -60 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Width
  19 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60947-7-1
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Number of levels
1
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Nominal current IN
41 A
Back of the hand protection
guaranteed
Bending test turns
135
Result of temperature-rise test
Test passed
Setpoint
5 N
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Insulating material
PA
Insulating material group
I
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
10
Internal cylindrical gage
A3
Connection
Feed-in stage
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Degree of pollution
3
Stripping length
10 mm ... 12 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Value
0.2 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Short-time current
0.3 kA
Shock form
Half-sine
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 15
27.4 mm
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Result of flexion and pull-out test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg

Product condition