1047421 Phoenix Contact Terminal Blocks

1047421 Product Details

• Height
  17.7 mm
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 6.0
  EC000897
• Acceleration
  30g
• ASD level
  6.12 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection
  Pick-off level
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
43.9 mm
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Value
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
Open side panel
No
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
21.6 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section solid min.
0.34 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
22 A (with a 2.5 mm² conductor cross section)
Nominal current IN
17.5 A
Result of thermal test
Test passed
Number of connections
19
Insulating material
PA
Degree of pollution
3
Overvoltage category
III
Nominal voltage UN
450 V
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ECLASS 11.0
27141120
ETIM 7.0
EC000897
Number of levels
1
Color
brown
Rated surge voltage
6 kV
Maximum total current
32 A
Nominal cross section feed-in
4 mm²
Insulating material group
I
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Oscillation, broadband noise test result
Test passed
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)

Product condition