1047476 Phoenix Contact Terminal Blocks

1047476 Product Details

• Rated surge voltage
  6 kV
• Maximum load current
  41 A (with 6 mm² conductor connection)
• Maximum total current
  41 A
• ASD level
  6.12 (m/s2)2/Hz
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Nominal cross section feed-in
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Open side panel
  No
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Length
  21.6 mm
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section AWG min.
  24
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 9.0
27141120
Color
pink
Insulating material group
I
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Number of connections
7
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 6.0
EC000897
Number of levels
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal voltage UN
450 V
Acceleration
30g
Shock test result
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
19 mm
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Nominal cross section
1.5 mm²
Insulating material
PA
Overvoltage category
III
Nominal current IN
41 A
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
17.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Value
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Connection
Feed-in stage
Ambient temperature (actuation)
-5 °C ... 70 °C

Product condition