1045932 Phoenix Contact Terminal Blocks

1045932 Product Details

• Maximum load current
  21 A (with a 2.5 mm² conductor cross section)
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Insulating material
  PA
• Nominal voltage UN
  450 V
• ETIM 6.0
  EC000897
• UNSPSC 7.0901
  39121410
• Flammability rating according to UL 94
  V0
• UNSPSC 18.0
  39121410
• Nominal current IN
  17.5 A
• ETIM 2.0
  EC000897
• UNSPSC 19.0
  39121410
• UNSPSC 21.0
  39121410
• Overvoltage category
  III
• UNSPSC 11
  39121410
• UNSPSC 13.2
  39121410
• Number of levels
  1
• Color
  green
• Insulating material group
  I
Back of the hand protection
guaranteed
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Maximum total current
21 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test turns
135
Short-time current
0.3 kA
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Degree of pollution
3
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
4.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Potentials
1
Open side panel
No
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
21.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141120
ECLASS 9.0
27141120
Number of connections
2
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
17.7 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ECLASS 4.0
27141120
ECLASS 5.1
27141120

Product condition