1045940 Phoenix Contact Terminal Blocks

1045940 Product Details

• ECLASS 10.0.1
  27141120
• Open side panel
  No
• Result of flexion and pull-out test
  Test passed
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Short-time current
  0.3 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Acceleration
  30g
• Shock form
  Half-sine
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  14
• Max. AWG conductor cross section, flexible
  14
• ECLASS 4.1
  27141120
• Nominal voltage UN
  450 V
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Maximum load current
21 A (with a 2.5 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Height
17.7 mm
Conductor cross section AWG min.
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Overvoltage category
III
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
4.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Nominal current IN
17.5 A
Bending test turns
135
Result of tight fit on support
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Length
21.6 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
UNSPSC 6.01
30211811
Potentials
1
Degree of pollution
3
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 7.0
27141120
Number of connections
2
Rated surge voltage
6 kV
Result of voltage-drop test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
UNSPSC 19.0
39121410
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Back of the hand protection
guaranteed
Conductor cross section short circuit testing
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Color
violet
Insulating material group
I
Maximum total current
21 A

Product condition