1045925 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Degree of pollution
  3
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Overvoltage category
  III
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Rated surge voltage
  6 kV
• Maximum total current
  21 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test turns
  135
• Tight fit on carrier
  NS 35/NS 15
• Short circuit stability result
  Test passed
• Short-time current
  0.3 kA
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
4.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Number of connections
2
Insulating material
PA
Insulating material group
I
Open side panel
No
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
1 N
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Number of levels
1
Color
blue
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W
Nominal current IN
17.5 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Conductor cross section flexible min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Nominal voltage UN
450 V
Acceleration
30g
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
ECLASS 10.0.1
27141120
Result of aging test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
21.6 mm
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
14
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 12.01
39121410
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
17.7 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Maximum load current
21 A (with a 2.5 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 5.1
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
1.5 mm²
Tensile test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
ECLASS 4.0
27141120
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410