1045931 Phoenix Contact Terminal Blocks

1045931 Product Details

• Nominal voltage UN
  450 V
• Nominal current IN
  17.5 A
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Short-time current
  0.3 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Length
  21.6 mm
• Conductor cross section AWG min.
  26
• Conductor cross section flexible max.
  1.5 mm²
• Internal cylindrical gage
  A1 / B1
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Min. AWG conductor cross section, flexible
  26
• Flammability rating according to UL 94
  V0
Open side panel
No
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of levels
1
Insulating material
PA
Degree of pollution
3
Maximum load current
21 A (with a 2.5 mm² conductor cross section)
Insulating material group
I
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35/NS 15
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
4.2 mm
Height
17.7 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Potentials
1
Overvoltage category
III
Maximum total current
21 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Maximum power dissipation for nominal condition
0.56 W
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
ASD level
6.12 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
Number of connections
2
Color
yellow
Power frequency withstand voltage setpoint
1.89 kV
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Back of the hand protection
guaranteed
ECLASS 10.0.1
27141120
UNSPSC 6.01
30211811

Product condition