1039830 Phoenix Contact AC/DC Power Supplies

Product Details

• Power loss nominal load max.
  < 48 W (120 V AC)
• Protection class
  I
• Depth
  120 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  100 V AC ... 240 V AC
• AC frequency range
  50 Hz ... 60 Hz
• Mains buffering time
  typ. 10 ms (120 V AC)
• Protective circuit/component
  Varistor
• Nominal output current (IN)
  20 A
• Protection against overvoltage at the output (OVP)
  ≤ 30 V DC
• Typical response time
  < 1 s
• Insulation voltage input/output
  4 kV AC (type test)
• Type of locking
  SPEEDCON M12
• Number of positions
  5
• Conducted noise emission
  EN 55016
• Contact discharge
  6 kV (Test Level 4)
• Signal
  1 kV (Test Level 2 - asymmetrical)
• Number of periods
  1 period
• Criterion C
  Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ETIM 6.0
EC002540
Installation distance right/left
20 mm / 20 mm
Ambient temperature (operation)
-25 °C ... 85 °C (Derating >60°C: 2.5 %/K)
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Dielectric strength maximum
≤ 300 V AC 15 s
Inrush current
typ. 20 A (at 25 °C)
Type of protection
Transient surge protection
Nominal output voltage
24 V DC ±1 %
Residual ripple
≤ 30 mVPP
Maximum power dissipation in no-load condition
< 3 W (120 V AC)
MTBF (IEC 61709, SN 29500)
> 1400000 h (25 °C)
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Noise emission
EN 55016
Discharge in air
8 kV (Test Level 4)
Comments
Criterion B
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
Height
304 mm
Degree of protection
IP67
Installation height
≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Input voltage range
100 V AC ... 240 V AC 10 %
Current consumption
5.6 A (100 V AC)
Input fuse
10 A (internal (device protection))
Recommended breaker for input protection
10 A ... 16 A (Characteristics B, C, D, K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Net weight
3.7 kg
Assembly instructions
Alignable: 20 mm horizontally, 50 mm vertically above, 100 mm vertically below
Coding
A-coded
Standard – Safety extra-low voltage
EN 60204-1 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic HF field
EN 61000-4-3
Input
3 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage dip
0 %
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 9.0
27040701
Width
151 mm
Installation distance top/bottom
50 mm / 100 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Degree of pollution
4
Discharge current to PE
< 3.5 mA
Nominal power consumption
36.8 W
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Derating
> 60 °C ... 70 °C (2.5%/K)
Output power
480 W
Efficiency
91 % (100 V AC)
Connection method
Circular connector
Standard - Safe isolation
DIN VDE 0100-410
Flicker
EN 61000-3-3
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Frequency
50 Hz
Additional text
Test Level 2
ECLASS 11.0
27040701
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Voltage
230 V AC
ECLASS 10.0.1
27040701
ETIM 7.0
EC002540