1039829 Phoenix Contact AC/DC Power Supplies

Product Details

• Installation distance right/left
  20 mm / 20 mm
• Ambient temperature (operation)
  -25 °C ... 85 °C (Derating > 60 °C (3 AC): 2,5 %/K / > 50 °C (2 AC): 2,5 %/K)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  3x 1.2 A (400 V AC)
• Mains buffering time
  typ. 10 ms (400 V AC)
• Derating
  > 60 °C ... 70 °C (2.5%/K)
• Typical response time
  < 1 s
• Protection class
  I
• Coding
  A-coded
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Electrostatic discharge
  EN 61000-4-2
• Depth
  120 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Installation height
  ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
• Discharge current to PE
  < 3.5 mA
• Input fuse
  3.15 A (internal (device protection), slow-blow)
• Protective circuit/component
  Varistor
• Protection against overvoltage at the output (OVP)
  ≤ 30 V DC
• Net weight
  3.7 kg
• MTBF (IEC 61709, SN 29500)
  > 1500000 h (25 °C)
Type of locking
SPEEDCON M12
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted noise emission
EN 55016
Discharge in air
8 kV (Test Level 4)
Input
2 kV (Test Level 3 - symmetrical)
Voltage
400 V AC
Voltage dip
0 %
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC002540
Installation distance top/bottom
50 mm / 100 mm
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
4
Input voltage range
3x 400 V AC ... 500 V AC -20 % ....+15 %
Nominal power consumption
39 W
Nominal output voltage
24 V DC ±1 %
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Output power
480 W
Insulation voltage input/output
4 kV AC (type test)
Connection method
Circular connector
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Flicker
EN 61000-3-3
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Conducted interference
EN 61000-4-6
Additional text
Test Level 2
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Height
304 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal input voltage range
3x 400 V AC ... 500 V AC
Inrush current
typ. 22 A (at 25 °C)
Type of protection
Transient surge protection
Nominal output current (IN)
20 A
Maximum power dissipation in no-load condition
< 2 W (400 V AC)
Efficiency
93 % (400 V AC)
Standard – Safety extra-low voltage
EN 60204-1 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Noise emission
EN 55016
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Frequency
50 Hz
ECLASS 9.0
27040701
Width
151 mm
Degree of protection
IP67
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Residual ripple
≤ 20 mVPP
Power loss nominal load max.
< 44 W (400 V AC)
Assembly instructions
Alignable: 20 mm horizontally, 50 mm vertically above, 100 mm vertically below
Number of positions
5
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 4)
Test field strength
10 V/m (Test Level 3)
Voltage dips
EN 61000-4-11
Number of periods
1 period
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 1 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ETIM 7.0
EC002540