1012967 Phoenix Contact Electrical Connectors

1012967 Product Details

• Diameter housing
  19 mm
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Color handle area
  black
• Stripping length of the individual wire
  7 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Signal type/category
  CANopen®
• Connection method
  Push-in connection
• Conductor cross section AWG
  26 ... 18 (without ferrule)
• Sealing material
  NBR
• Length
  51 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Number of positions
  5
• Standards/regulations
  acc. to DIN EN 45545-2
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Torque
  0.4 Nm (M12 knurl)
• Standards/specifications
  M12 connector IEC 61076-2-101
• ECLASS 9.0
  27440102
• External cable diameter
  4 mm ... 8 mm
• Degree of protection
  IP65
• Insulation resistance
  ≥ 100 MΩ
Degree of pollution
3
Assembly instructions
The connector pin assignment can be rotated 45° to the cable outlet
Contact material
CuSn
Contact carrier material
PA 6.6
ECLASS 10.0.1
27440102
Stripping length of the sheath
31 mm
Rated voltage
48 V AC
Coding
A - standard
Insertion/withdrawal cycles
≥ 100
Contact surface material
Ni/Au
Additional material specifications
PBT (Pressure nut, weight: 2.36 g)
Overvoltage category
II
Status display
No
Flammability rating according to UL 94
V0
Material of grip body
PA 6.6
Material, knurls
Zinc die-cast, nickel-plated
ECLASS 11.0
27440102

Product condition