0790491 Phoenix Contact Terminal Blocks

0790491 Product Details

• Number of levels
  1
• Insulating material
  PA
• Degree of pollution
  3
• Nominal current IN
  101 A
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Setpoint
  10 N
• Requirements, voltage drop
  ≤ 3.2 mV
• Short-time current
  3 kA
• Number of connections
  2
• Overvoltage category
  III
• Length
  60 mm
• Max. cross section for cable lug connection
  6 mm²
• Bolt diameter
  6 mm
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
UNSPSC 19.0
39121410
Nominal cross section
25 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
3.26 W
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
18 mm
AWG min
16
Hole diameter, min.
6.5 mm
Screw thread
M6
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Maximum load current
101 A (with 25 mm² conductor cross section)
Nominal voltage UN
800 V (the nominal voltage applies to insulated cable lugs)
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
64.5 mm
Connection method
Bolt connection
Min. cross section for cable lug connection
2.5 mm²
Tightening torque max
3.7 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Color
gray
Insulating material group
I
Connection in acc. with standard
CSA
Surge voltage test setpoint
9.8 kV
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
25 mm²
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 32
69.5 mm
AWG max
4
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
72 mm
Cable lug connection according to standard
DIN 46237:1970-07
Cable lug width, max.
16 mm
Tightening torque, min
3.2 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410

Product condition