0790404 Phoenix Contact Terminal Blocks

0790404 Product Details

• Number of connections
  2
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  800 V (the nominal voltage applies to insulated cable lugs)
• Surge voltage test setpoint
  9.8 kV
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  59.5 mm
• Height NS 32
  57 mm
• AWG min
  20
• Insulating material group
  I
• Nominal current IN
  41 A
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Setpoint
  5 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Cable lug connection according to standard
DIN 46237:1970-07
Connection method
Bolt connection
Cable lug width, max.
9.6 mm
Screw thread
M4
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
Yes
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
43.5 mm
Height NS 35/7,5
52 mm
Width
11 mm
Min. cross section for cable lug connection
0.5 mm²
AWG max
14
Max. cross section for cable lug connection
2.5 mm²
Hole diameter, min.
4.3 mm
Bolt diameter
4 mm
Tightening torque, min
1.5 Nm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 5.0
27141100
Number of levels
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Color
gray
Insulating material
PA
Maximum load current
41 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
ECLASS 9.0
27141120
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Tightening torque max
1.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
ETIM 2.0
EC000897
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410

Product condition