0790488 Phoenix Contact Terminal Blocks

0790488 Product Details

• Flammability rating according to UL 94
  V0
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  3.26 W
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of connections
  2
• Overvoltage category
  III
• Maximum load current
  101 A (with 25 mm² conductor cross section)
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  10 N
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test duration per axis
  5 h
• Static insulating material application in cold
  -60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
60 mm
Height NS 35/15
72 mm
AWG max
4
Bolt diameter
5 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Color
gray
Degree of pollution
3
Nominal voltage UN
800 V (the nominal voltage applies to insulated cable lugs)
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 32
69.5 mm
Connection method
Bolt connection
Screw thread
M5
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Number of levels
1
Nominal cross section
25 mm²
Insulating material group
I
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Cable lug connection according to standard
DIN 46237:1970-07
AWG min
16
Tightening torque, min
2.5 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Nominal current IN
101 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
18 mm
Min. cross section for cable lug connection
1 mm²
Cable lug width, max.
16 mm
Tightening torque max
3 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Height NS 35/7,5
64.5 mm
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
5.3 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 12.01
39121410

Product condition