0790543 Phoenix Contact Terminal Blocks

0790543 Product Details

• Number of connections
  2
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Number of levels
  1
• Flammability rating according to UL 94
  V2
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  800 V (the nominal voltage applies to insulated cable lugs)
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Cable lug connection according to standard
  DIN 46237:1970-07
• Hole diameter, min.
  3.2 mm
• Tightening torque max
  0.8 Nm
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Insulating material
PA
Overvoltage category
III
Nominal current IN
24 A
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
43.5 mm
Height NS 32
50.5 mm
AWG max
14
UNSPSC 18.0
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
45.5 mm
Max. cross section for cable lug connection
2.5 mm²
Cable lug width, max.
7.6 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Color
gray
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Bolt connection
AWG min
20
Screw thread
M3
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
9 mm
Height NS 35/15
53 mm
Min. cross section for cable lug connection
0.5 mm²
Bolt diameter
3 mm
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410

Product condition