0790462 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Degree of pollution
  3
• Maximum load current
  36 A (with 6 mm² conductor cross section)
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of thermal test
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  11 mm
• Connection method
  Bolt connection
• AWG min
  20
• Hole diameter, min.
  4.3 mm
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 10.0.1
  27141126
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 9.0
  27141126
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• UNSPSC 18.0
  39121410
Number of connections
2
Overvoltage category
III
Shock protection test specification
IEC 60529:2013-08
Result of surge voltage test
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
AWG max
14
Screw thread
M4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W
Back of the hand protection
guaranteed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
59.5 mm
Height NS 32
57 mm
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
2.5 mm²
Bolt diameter
4 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Color
gray
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
36 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
1.5 mm
Connection in acc. with standard
CSA
Cable lug connection according to standard
DIN 46237:1970-07
Cable lug width, max.
9.6 mm
Tightening torque, min
1.5 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Rated surge voltage
8 kV
Nominal voltage UN
800 V (the nominal voltage applies to insulated cable lugs)
Power frequency withstand voltage setpoint
2.2 kV
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
69 mm
Height NS 35/7,5
52 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Tightening torque max
1.8 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 20.0
39121410