0790530 Phoenix Contact Terminal Blocks

0790530 Product Details

• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
• Setpoint
  1 N
• Tight fit on carrier
  NS 32/NS 35
• Acceleration
  30g
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  9 mm
• AWG min
  20
• Tightening torque max
  0.8 Nm
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock duration
  18 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  53 mm
• Min. cross section for cable lug connection
  0.5 mm²
Screw thread
M3
Tightening torque, min
0.6 Nm
ECLASS 10.0.1
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
2
Insulating material
PA
Rated surge voltage
8 kV
Insulating material group
I
Connection in acc. with standard
CSA
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Result of surge voltage test
Test passed
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 32
50.5 mm
AWG max
14
Cable lug width, max.
7.6 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Color
gray
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
800 V (the nominal voltage applies to insulated cable lugs)
Open side panel
Yes
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
43.5 mm
Connection method
Bolt connection
Max. cross section for cable lug connection
2.5 mm²
Bolt diameter
3 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Number of levels
1
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
24 A
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
45.5 mm
Cable lug connection according to standard
DIN 46237:1970-07
Hole diameter, min.
3.2 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
ECLASS 4.1
27141100
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410

Product condition