KFD2-UFT-2.D Pepperl + Fuchs Electronic Components
Part#:KFD2-UFT-2.D
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Frequency Converter with Direction and Synchronization Monitor, 2-channel signal conditioner, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Input frequency 1 mHz ... 1 kHz, Current output 0/4 mA ... 20 mA, Relay contact and transistor output,
Check out the KFD2-UFT-2.D Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- UL approval E223772
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
- Mass 300 g
- Input EN 60947-5-6:2000
- Degree of protection IEC 60529:2001
- Labeling space for labeling at the front
- Directive 2014/35/EU EN 61010-1:2010
- Configuration via operating buttons, via PACTware
- Electromagnetic compatibility NE 21:2006
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Control elements Control panel
- Interface/output III, IV basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Interface/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Display elements LEDs , display
- Output V/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Output III, IV/V basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Mutual output I, II, IV reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Mutual output I, II, III reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Output III, IV/input III, IV basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Output III, IV/power supply and collective error basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Influence of ambient temperature 0.003 %/K (30 ppm)
- Response delay ≤ 200 ms
- Input I, II/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Input III, IV/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Output I, II/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Measuring time frequency measurement: < 100 ms
- Resolution slip monitoring: 1% frequency measurement: 0,1% of measured value; but >0.001Hz
- Fault signal downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43)
- Measurement range 0.001 ... 1000 Hz
- Accuracy slip monitoring: 1% frequency measurement: 0.5% of measured value; but >0.001Hz
- Collective error message Power Rail
- Load max. 650 Ω
- Output V analog
- Open loop voltage max. 24 V DC
- Signal level 1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof), 0-signal: blocked output (off-state current ≤ 10 µA)
- Output III and IV signal , electronic output, passive
- Current range 0 ... 20 mA or 4 ... 20 mA
- Active/Passive I > 4 mA (for min. 100 ms) / I < 1.5 mA
- Energized/De-energized delay approx. 20 ms / approx. 20 ms
- Mechanical life 5 x 107switching cycles
- Contact loading 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
- Input frequency rotation direction monitoring 0.001 ... 1000 Hz slip monitoring 10 ... 1000 Hz
- Pulse duration min. 250 µs , overlap on direction of rotation signal: ≥ 125 µs
- Line fault detection breakage I ≤ 0.15 mA; short-circuit I > 4 mA
- Output I, II signal, relay
- Open circuit voltage/short-circuit current 8.2 V / 10 mA
- Switching point/switching hysteresis logic 1: > 2.5 mA ; logic 0: < 1.9 mA
- Power dissipation 2.2 W
- Programming interface programming socket
- Rated current approx. 130 mA
- Input I, II 2-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact
- Signal type Digital Input
- Connection terminals 23+, 24- or power feed module/Power Rail
- Connection side field side
- Rated voltage 20 ... 30 V DC
- Power consumption 2.5 W
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD2-UFT-2.D Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
