KFD2-DU-EX1.D Pepperl + Fuchs Electronic Components
Part#:KFD2-DU-EX1.D
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Switch Amplifier, Timer Relay, 1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact and transistor output, Adjustable output timer functions from 10 ms ... 60 min, Input frequency up to 80 Hz; pulse divider u
Check out the KFD2-DU-EX1.D Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- UL approval E223772
- IECEx certificate IECEx TUN 03.0000, IECEx TSA 18.0007X
- Control drawing 16-538FM-12
- IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I, Ex ec nC IIC T4 Gc
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
- Certificate TÜV 02 ATEX 1885 X
- Power Po 34 mW (linear characteristic)
- Maximum safe voltage Um 40 V (Attention! The rated voltage can be lower.)
- Current Io 13.5 mA
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Voltage Uo 10.1 V
- Maximum safe voltage 40 V DC (Attention! The rated voltage can be lower.)
- Marking
II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I - EU-type examination certificate TÜV 99 ATEX 1408
- Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
- Mass approx. 300 g
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Electromagnetic compatibility NE 21:2006
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Directive 2014/35/EU EN 61010-1:2010
- Configuration via operating buttons
- Degree of protection IEC 60529:2001
- Control elements Control panel
- Labeling space for labeling at the front
- Reset/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Display elements LEDs , display
- Output II/reset basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Output II/power supply and collective error basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Influence of ambient temperature 0.003 %/K (50 ppm)
- Output I/power supply and reset reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Signal level 1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof), 0-signal: blocked output (off-state current ≤ 10 µA)
- Accuracy 2 ms
- Output I, II against eachother reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Resolution < 0.1 % of the set value, min. 10 ms
- Input I/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Energized/De-energized delay approx. 20 ms / approx. 20 ms
- Mechanical life 5 x 107switching cycles
- Active/Passive I > 4 mA/I < 1.5 mA
- Input II reset
- Output II signal , electronic unit, isolated
- Input frequency 0 ... 80 Hz , pulse divider 0 ... 1 kHz
- Contact loading 253 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A
- Line fault detection breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA
- Rated current approx. 100 mA
- Open circuit voltage/short-circuit current 8.2 V / 10 mA
- Output I signal , Relay output
- Input I acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
- Pulse duration min. 75 µs / 1 ms see instruction manuals; the maximum input frequency has to be observed.
- Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
- Connection side field side
- Signal type Digital Input
- Power consumption 1.8 W
- Rated voltage 20 ... 30 V DC
- Connection Power Rail or terminals 23+, 24-
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD2-DU-EX1.D Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
