KFD2-UFC-1.D Pepperl + Fuchs Electronic Components
Part#:KFD2-UFC-1.D
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Frequency Converter with Trip Values, 1-channel signal conditioner, 24 V DC supply (Power Rail), Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts, Input frequency 1 mHz ... 10 kHz, Current output 0/4 mA ... 20 mA, Relay contact and transistor
Check out the KFD2-UFC-1.D Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-15:2010
- UL approval E223772
- Marking
II 3G Ex nA nC IIC T4 Gc - Certificate PF 08 CERT 1216 X
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
- Labeling space for labeling at the front
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Degree of protection IEC 60529:2001
- Mass 300 g
- Directive 2014/35/EU EN 61010-1:2010
- Electromagnetic compatibility NE 21:2006
- Display elements LEDs , display
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Configuration via operating buttons, via PACTware
- Interface/output III basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Control elements Control panel
- Interface/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Start-up override/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Output IV/power supply and collective error functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
- Output III/power supply and collective error basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Output III/IV basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Output I, II/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Mutual output I, II, III reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Input I/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Response delay ≤ 200 ms
- Input I 2- or 3-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact
- Connection side field side
- Influence of ambient temperature 0.003 %/K (30 ppm)
- Measuring time < 100 ms
- Programming interface programming socket
- Resolution 0.1 % of the measurement value , ≥ 0.001 Hz
- Accuracy 0.1 % of the measurement value , > 0.001 Hz
- Measurement range 0.001 ... 10000 Hz
- Fault signal downscale I ≤ 3.6 mA , upscale ≥ 21.5 mA (acc. NAMUR NE43)
- Collective error message Power Rail
- Load max. 650 Ω
- Open loop voltage max. 24 V DC
- Output IV analog
- Current range 0 ... 20 mA or 4 ... 20 mA
- Signal level 1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof), 0-signal: blocked output (off-state current ≤ 10 µA)
- Output III electronic output, passive
- Energized/De-energized delay approx. 20 ms / approx. 20 ms
- Power dissipation/power consumption ≤ 2 W / 2.2 W
- Mechanical life 5 x 107switching cycles
- Output I, II signal, relay
- Active/Passive I > 4 mA (for min. 100 ms) / I < 1.5 mA
- Contact loading 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 V DC / 2 A
- Input II startup override: 1 ... 1000 s, adjustable in steps of 1 s
- Line fault detection breakage I ≤ 0.15 mA; short-circuit I > 4 mA
- Input frequency 0.001 ... 10000 Hz
- Pulse duration > 50 µs
- Input resistance 4.7 kΩ
- Switching point/switching hysteresis logic 1: > 2.5 mA ; logic 0: < 1.9 mA
- Open circuit voltage/short-circuit current 22 V / 40 mA
- Rated voltage 20 ... 30 V DC
- Connection terminals 23+, 24- or power feed module/Power Rail
- Safety Integrity Level (SIL) SIL 2
- Rated current approx. 100 mA
- Signal type Digital Input
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFD2-UFC-1.D Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
