8118289 Festo Electric Actuators

8118289 Product Details

• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• Nominal current
  5.3 A
• IO-Link®, port class
  A
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Size
  60
• Stroke reserve
  0 mm
• Screw diameter
  12 mm
• Type code
  EPCS
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection pattern
  00992264
• Max. current of digital logic outputs
  100 mA
• Number of digital logic inputs
  2
• Work range of logic input
  24 V
• Rotor position sensor resolution
  16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Max. cable length
15 m outputs 20 m for IO-Link® operation
Additional functions
User interface Integrated end-position sensing
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic outputs 24 V DC
2
Product weight
3329 g
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Symbol
00997294
Rotor position sensor
Absolute encoder, single-turn
Max. speed
0.09 m/s
Storage temperature
-20 °C ... 60 °C
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
KC characters
KC EMC
Display
LED
Input switching logic
NPN (negative switching) PNP (positive switching)
Parameterization interface
IO-Link® User interface
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
150 mm
Reversing backlash
100 µm
Spindle pitch
5 mm/U
Mounting position
Any
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Max. acceleration
1.5 m/s²
Insulation protection class
B
Relative air humidity
0 - 90 % Non-condensing
Ambient temperature
0 °C ... 50 °C
Max. torque Mz
6.4 Nm
Piston rod material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Logic interface, connection type
Plug
Logic interface, number of poles/wires
8
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
Repetition accuracy
±0.02 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. radial force on actuator shaft
230 N
Guide value for payload, vertical
46 kg
Additional moving mass per 10 mm stroke
6.5 g
Spindle material
Roller bearing steel
Motor type
Stepper motor
Spindle type
Ball screw drive
Duty cycle
100%
Max. torque Mx
0 Nm
Max. feed force Fx
900 N
Basic weight with 0 mm stroke
2294 g
Spindle nut material
Steel
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Permissible voltage fluctuations
+/- 15 %
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Guide value for payload, horizontal
120 kg
Additional weight per 10 mm stroke
69 g
Type of mounting
With internal thread With accessories
Housing material
Wrought aluminum alloy, smooth-anodized

Product condition

Related documents 8118289 Specs