8101546 Festo Electric Actuators

8101546 Product Details

• Max. speed
  0.44 m/s
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  PNP (positive switching)
• Power supply, connection pattern
  00995989
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, protocol version
  Device V 1.1
• Maintenance interval
  Life-time lubrication
• Toothed belt elongation
  0.31 %
• Stroke
  50 mm
• Type code
  EPCE
• Symbol
  00997342
• Protection against torsion/guide
  With plain-bearing guide
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, type of connection
  Plug
• Logic interface, connection type
  Plug
Max. current consumption
3000 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
Toothed belt material
Polychloroprene with glass fiber
Feed constant
32 mm/U
Design
Electric actuator With integrated drive
Repetition accuracy
±0.05 mm
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
IO-Link®, communication mode
COM3 (230.4 kBd)
Size
45
Piston rod thread
M6
Position sensing
Motor encoder
Homing
Fixed stop block positive Fixed stop block, negative
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque Mx
0 Nm
Guide value for payload, horizontal
5 kg
Moving mass at 0 mm stroke
87 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Display
LED
Parameterization interface
IO-Link® User interface
Switching logic at outputs
PNP (positive switching)
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Nominal current
3 A
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Toothed belt pitch
2 mm
Stroke reserve
0 mm
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Relative air humidity
0 - 90 %
Max. torque My
0.4 Nm
Guide value for payload, vertical
2.5 kg
Additional weight per 10 mm stroke
29 g
Cover material
Wrought aluminum alloy, anodized
Max. cable length
15 m outputs 20 m for IO-Link® operation
Additional functions
User interface Integrated end-position sensing
Logic interface, connection pattern
00992264
DC nominal voltage
24 V
Number of digital logic inputs
2
Product weight
952 g
IO-Link®, minimum cycle time
1 ms
IO-Link®, number of ports
1
IO-Link®, Connection technology
Plug
Drive pinion effective diameter
10.18 mm
Mounting position
Any
Piston rod end
External thread
Rotor position sensor
Absolute encoder, single-turn
Max. acceleration
9 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Reference value, running performance
500 km
Type of mounting
With through-hole With accessories
Insulation protection class
B
Certification
RCM compliance mark
Max. torque Mz
0.4 Nm
Additional moving mass per 10 mm stroke
0.455 g
Housing material
Wrought aluminum alloy, anodized
Corrosion resistance class (CRC)
0 - No corrosion stress
Impact energy in the end positions
0.003 J
Max. feed force Fx
85 N
Basic weight with 0 mm stroke
807 g
Piston rod material
High-alloy stainless steel

Product condition

Related documents 8101546 Specs